omgiv Posted September 20, 2010 Report Share Posted September 20, 2010 Hi Guys, I was wondering if the gen Zenith Daytona was able to pull the crown out twice or only once. I know there is no need to pull it out twice since there is no date function, but cannot see a difference in the setting lever spring. Does anyone know if it can or what part they changed to make it pull out only once? Thanks!!!! Link to comment Share on other sites More sharing options...
freddy333 Posted September 20, 2010 Report Share Posted September 20, 2010 Once unscrewed (into the winding position), there is 1 stop in the stem (to set the hands) on all Daytonas. Link to comment Share on other sites More sharing options...
omgiv Posted September 20, 2010 Author Report Share Posted September 20, 2010 Thanks Freddy! Do you know what they changed to make it that way? Thanks!!! Link to comment Share on other sites More sharing options...
freddy333 Posted September 20, 2010 Report Share Posted September 20, 2010 Not sure (I have never built a Zenith Daytona), but I would think it would have to be the setting lever (Rolex part 4030-220). Link to comment Share on other sites More sharing options...
omgiv Posted September 20, 2010 Author Report Share Posted September 20, 2010 Thanks Freddy! You may be right. I know that the setting levers look different. I was thinking that it was more like the setting lever spring though. I changed the setting lever spring on my ETA 2846 to make it a one pull instead of two. Usually the setting lever spring will have fewer cut outs (if that makes sense). From pictures, the Rolex and Zenith setting lever springs both look identical. Thanks again!!!! Link to comment Share on other sites More sharing options...
ubiquitous Posted September 21, 2010 Report Share Posted September 21, 2010 You can insert a stop into an open slot that blocks the 3rd position. The settings for the standard Zenith EP400 are: 1st position - winding 2nd position - time setting 3rd position - date setting I've seen some people add the stop; personally speaking on my own projects, it's something I've never done as it's just not that important to me. Link to comment Share on other sites More sharing options...
omgiv Posted September 21, 2010 Author Report Share Posted September 21, 2010 Thanks Ubi. I will probably have to see it to wrap my mind around. I can't imagine where the stop would be placed. Here is a link to a picture of a Rolex setting lever spring beside the Zenith one. http://www.orologeria.com/webart/foto/rivista/zenith_dayt/rolex_zenith%20174.jpg Link to comment Share on other sites More sharing options...
ubiquitous Posted September 21, 2010 Report Share Posted September 21, 2010 This is how some people do it... Link to comment Share on other sites More sharing options...
omgiv Posted September 21, 2010 Author Report Share Posted September 21, 2010 Thanks Ubi. That helps a lot. Your photo library must be huge!!!!!! Link to comment Share on other sites More sharing options...
omgiv Posted September 22, 2010 Author Report Share Posted September 22, 2010 I think that I may have figured out what makes the Rolex movement stop after the first pull. Freddy was partly correct. The setting lever is different on the Rolex but I believe it is the yoke for sliding pinion that makes the difference. After looking at both movements, the Rolex yoke has a higher stopping point that restricts the setting lever from going any further. Now the question is whether you need both or just the yoke to make the change. Anyway, just thought I would share. Thanks for the help!!!!!! Zenith Rolex Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now