PeteM Posted October 14, 2010 Report Share Posted October 14, 2010 Hi guys Not being much of a knowledgeable guy when it comes to movements I need some advice on an escapement issue I am having on the new asian 7753. Basically the movement stopped so after the usual playing about I opened the CB and found the Pallet spoon had slipped over. Overbanking I think its called. Any way I took out the balance spring and replaced it back again with the PSs correctly placed. It has done it twice now in the space of a few hours and I am not sure what to try next. It keeps slipping. As far as I can see everything is replaced as it should be. Any advice would be appreciated Thanks Link to comment Share on other sites More sharing options...
rosnik Posted October 14, 2010 Report Share Posted October 14, 2010 Do you Pete want best advice? Easy.....ship it to Domi!!! Link to comment Share on other sites More sharing options...
Rolexman Posted October 15, 2010 Report Share Posted October 15, 2010 Look if the bridge of the pallet fork is screwed down tight. Be carefull not to break the pivots of the pallet fork, so make sure it is correctly seated in the upper and lower jewel. Mark. Link to comment Share on other sites More sharing options...
PeteM Posted October 16, 2010 Author Report Share Posted October 16, 2010 Look if the bridge of the pallet fork is screwed down tight. Be carefull not to break the pivots of the pallet fork, so make sure it is correctly seated in the upper and lower jewel. Mark. Thanks Mark I shall try that Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now