FxrAndy Posted November 23, 2010 Report Share Posted November 23, 2010 or the other way round, date at 4 and crown at 3 using an ETA with a black date wheel ??????????? I am stumped, i can get a white date wheel but not a black any one know of one???? Link to comment Share on other sites More sharing options...
mastrmindalliance Posted November 23, 2010 Report Share Posted November 23, 2010 Gen or rep? Off the top of my head. Both the Seiko Monster and the Sinn U1 have date at 3/crown at 4. Link to comment Share on other sites More sharing options...
Pugwash Posted November 23, 2010 Report Share Posted November 23, 2010 or the other way round, date at 4 and crown at 3 using an ETA with a black date wheel ??????????? I am stumped, i can get a white date wheel but not a black any one know of one???? Are you just after the date wheel? Cousins UK have ETA wheels with oddly placed dates. Link to comment Share on other sites More sharing options...
FxrAndy Posted November 24, 2010 Author Report Share Posted November 24, 2010 Thanks for the replys guys, it is for a personal project based on the compressor internal bezel case so gen but non branded, Late last night i found that sin uses the one that i may need but by then i had made one any way, Link to comment Share on other sites More sharing options...
1976 Posted November 24, 2010 Report Share Posted November 24, 2010 Thanks for the replys guys, it is for a personal project based on the compressor internal bezel case so gen but non branded, Late last night i found that sin uses the one that i may need but by then i had made one any way, When you finish your project could you post some pictures,i am also thinking of doing something similar. Best Regards. Link to comment Share on other sites More sharing options...
FxrAndy Posted November 24, 2010 Author Report Share Posted November 24, 2010 When you finish your project could you post some pictures,i am also thinking of doing something similar. Best Regards. These compressor cases are not such a bolt in project as many may think, you have to have the date wheel that they sell as a standard will not work if the crown was offset from 3 by 11.61 degfrees or multiples of that then it would work, this crown is off set by roughtly 17.41 degrees so a date wheel (i could buy a white one but i did not want white i wanted black) had to be made up to suit by sanding 2 date wheels down and adding them together. Also the movement holder has to be modded to fit, it is supposed to be for a 2824, but needed to be made a little larger, also i am using a 2892-2 so a movement space has to be used and i have to change the hour wheel, canon pin and seconds wheel to clear the dial with the hands Other options i wanted to do but are looking to be too much work right now are to fit screwdown crowns, but then the case will have to be drilled to take the tubes Re print the inner bezel to GMT and fit a 2893-2, again a lot of work and not a lot of time right now Link to comment Share on other sites More sharing options...
FxrAndy Posted December 3, 2010 Author Report Share Posted December 3, 2010 All finished and it gave me some issues but nothing that i couold not surmouunt I will post some pics and details later Link to comment Share on other sites More sharing options...
Migge Posted December 3, 2010 Report Share Posted December 3, 2010 Interesting, it will be fun to see your pictures Andy! You are rapidy becoming a good watchmaker =) Link to comment Share on other sites More sharing options...
redwatch Posted December 3, 2010 Report Share Posted December 3, 2010 Sweet! Looking forward to seeing the results Andy! Link to comment Share on other sites More sharing options...
FxrAndy Posted December 3, 2010 Author Report Share Posted December 3, 2010 Sweet! Looking forward to seeing the results Andy! You just need to look here mate Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now