jdkno Posted December 30, 2010 Report Share Posted December 30, 2010 I just recieved my first PAM' one of the new 111J's and had a few questions before I screwed something up. This is my first hand wind so when winding it is there any way to tell that it is wound all the way? I would hate to break it by over winding. Are the springbars really springbars that just look like screws or are they really screws that I will need to unscrew in order to remove the bracelet? I ordered it with the SS bracelet and I need to re-size it. It looks like screws rather than pins is that correct or is it pins that just look like screws? Don't want to try the wrong thing and scratch something. Thanks Link to comment Share on other sites More sharing options...
FxrAndy Posted December 30, 2010 Report Share Posted December 30, 2010 Firstly You will know when a 6497 is full would as you will not be able to wind it any more, it is quite opviose as the crown will not turn any more The strap is attched with screws a 1.6mm screw driver is recomended And if your bracelet is any thing like mine the screws in the side are to adjust it, i would also check the screws on the back if the links are the old style as they can also be loose Link to comment Share on other sites More sharing options...
asf Posted December 30, 2010 Report Share Posted December 30, 2010 Firstly You will know when a 6497 is full would as you will not be able to wind it any more, it is quite opviose as the crown will not turn any more The strap is attched with screws a 1.6mm screw driver is recomended And if your bracelet is any thing like mine the screws in the side are to adjust it, i would also check the screws on the back if the links are the old style as they can also be loose +1 Excellent Link to comment Share on other sites More sharing options...
jdkno Posted December 30, 2010 Author Report Share Posted December 30, 2010 Thanks just wound it a little more and sure enough it stopped. For the lug screws, I will use the screwdriver but don't they make springbars that look like the screws and if so would it be a good idea to get some and replace the screws? My bracelet does have screws on the backside so I will check them out to make sure they are tight. Once tight will I need to worry about them coming loose again? Should I put lock tight on them all? Link to comment Share on other sites More sharing options...
asf Posted December 30, 2010 Report Share Posted December 30, 2010 When I first got my bracelet forthe PAM 236, I dismantled it, cleaned, oiled, and loctite blue the screws. I recommend the same! Link to comment Share on other sites More sharing options...
jdkno Posted December 30, 2010 Author Report Share Posted December 30, 2010 Only oil I have at the house right now is like oil you would use on firearms. Think that would work? Link to comment Share on other sites More sharing options...
asf Posted December 30, 2010 Report Share Posted December 30, 2010 I'd recommend sewing machine oil or all purpose oil. Oil for firearms should be fine. Search for threads about oiling bracelets. I hear using bicycle chain grease (something crazy like that) works great. When you go and do this take it slow and keep your parts in order. Link to comment Share on other sites More sharing options...
FxrAndy Posted December 30, 2010 Report Share Posted December 30, 2010 Olive oil would also be great and be less harmfull to your skin than weapons oils, i know for one that i hate the smell on my hands when i have been cleaning weapons all day Link to comment Share on other sites More sharing options...
jdkno Posted December 30, 2010 Author Report Share Posted December 30, 2010 Well I got it re sized without scratching it lol I checked the screws on the back and some were loose. I did not have time to take it all apart so I just tightened them down for now. I am ordering a rubber strap so when that comes I will pull the bracelet apart and loctite all the screws. I did run into one problem. When I went to unscrew the post at the 12o'clock lug it just kept turning without coming out. I put pressure on the otherside and it pushed out. Checking to see if the problem was the screw or the threads in the case I tried the screw from the 6o'clock lug and it worked just fine. Thinking I had a screwed up screw I decided to try it in the 6 position and it worked like it should. Needless to say I am confused but atleast it is together and I put blue loctite on them to make sure they stay put. Hope it won't be too hard to get them loose. Don't they make springbars that look like the screws? I used Break Free CLP on the bracelet and it seems to have done the job. It is pretty smooth and I cleaned it up with soapy water so the chemical shouldn't hurt me. I love the smell of gun oil by the way haha. Overall I am happy with it, the CG sits tight to the case and the lever only protrudes a hair at the pin area. I take it a thinner o ring at the crown would take care of this. Lume on the dial is pretty good, the hands not so good but it will work for now till I decide to do a re-lume. Link to comment Share on other sites More sharing options...
asf Posted December 30, 2010 Report Share Posted December 30, 2010 You can get spring bar looking screws from watchbitz here or pantime.com Link to comment Share on other sites More sharing options...
ocram Posted December 30, 2010 Report Share Posted December 30, 2010 Yes, there are springbars which looks like screws. But they won't work with the bracelet because they are too thick. Like screws with tubes. But you could order a set by River and use them with the rubber strap. Makes strap changing much easier. Link to comment Share on other sites More sharing options...
Tom Hawkes Posted December 30, 2010 Report Share Posted December 30, 2010 (edited) delete pls Edited December 30, 2010 by Tom Hawkes Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now