Whatever123 Posted February 11, 2011 Report Share Posted February 11, 2011 Hi there, I have an asian 6497 that won't wind anymore, it just slips through. After closer inspection, I found out that the problem is the little spring I marked in this picture: The end of the spring that is supposed to push that little anchor against the next wheel (sorry, I don't know the correct words...) always moves to the edge so that it no longer holds up against the anchor. You can see the problem here: What can I do? Try to bend it a bit? Thanks, Whatever Quote Link to comment Share on other sites More sharing options...
Justasgood Posted February 11, 2011 Report Share Posted February 11, 2011 Remove that small click wheel and you will probably find that the tail of the spring(That seats in a hole to keep it in place) has probably broken. Easy fix, new spring....good as new! Quote Link to comment Share on other sites More sharing options...
Whatever123 Posted February 11, 2011 Author Report Share Posted February 11, 2011 Thanks, but it's not broken - seems to be OK and stays in the hole... oh, does that spring have a name btw.? Quote Link to comment Share on other sites More sharing options...
stiff muckler Posted February 11, 2011 Report Share Posted February 11, 2011 It's a "click spring". stiff recommends that you use da larger screwdriver for this screw. sm iiH! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.