kornblomst Posted April 2, 2011 Report Share Posted April 2, 2011 Hi All After walking around a whole day at the job I suddenly see that the minute hand has fallen off on my pam 177. Do you guys know if this is an easy/difficult fix that I can do by my self. Do you know if special tools are needed besides mini screwdriver and a pair of tweezers? Any advise would be highly appreciated ) /Korn Link to comment Share on other sites More sharing options...
FxrAndy Posted April 2, 2011 Report Share Posted April 2, 2011 There is a thread about this and it is pretty simple with basic tools, there seams to be a spate of hands falling off and bad QC on these new pams though what with hands falling off and the 005 movement issues. Link to comment Share on other sites More sharing options...
kornblomst Posted April 2, 2011 Author Report Share Posted April 2, 2011 thanks... pm sent Link to comment Share on other sites More sharing options...
highlydope Posted April 2, 2011 Report Share Posted April 2, 2011 Link to comment Share on other sites More sharing options...
kornblomst Posted April 2, 2011 Author Report Share Posted April 2, 2011 ohh..didn't see this post...thanks Link to comment Share on other sites More sharing options...
Rolexman Posted April 2, 2011 Report Share Posted April 2, 2011 Make sure to line the hands up @ 12 o clock (very important). Lay the minute hand on top of the hour hand, lay down some transparent plastic kitchen foil over the hands (to avoid scratches) and gently push the hand down @12 and @6 position using tooth pics (as near to the centre as possible). You need both hand. Easy tip if you don't have professional tools. Make sure to check the hand is parallel with the hour hand otherwise they will touch. Good luck and let us know ho it went! Link to comment Share on other sites More sharing options...
Tom Hawkes Posted April 2, 2011 Report Share Posted April 2, 2011 Same thread on the same page.. Oh well, good luck OP. Link to comment Share on other sites More sharing options...
Gobo Posted April 2, 2011 Report Share Posted April 2, 2011 If your 177 is from the hublot factory your screwed as once the hands come off they dont go back on as the hole in the hand is to large, probably the reason it fell off. Sead has made a thread about this problem somewhere. Link to comment Share on other sites More sharing options...
Tom Hawkes Posted April 2, 2011 Report Share Posted April 2, 2011 If your 177 is from the hublot factory your screwed as once the hands come off they dont go back on as the hole in the hand is to large, probably the reason it fell off. Sead has made a thread about this problem somewhere. Probably fell off because the hole on HIS was too big, yes. But people have switched movements on H-factory reps and used the original hands. So don't start any panic.. Link to comment Share on other sites More sharing options...
Rolexman Posted April 2, 2011 Report Share Posted April 2, 2011 Probably fell off because the hole on HIS was too big, yes. But people have switched movements on H-factory reps and used the original hands. So don't start any panic.. +1 Link to comment Share on other sites More sharing options...
kornblomst Posted April 3, 2011 Author Report Share Posted April 3, 2011 thanks for all the advice. I'm getting it fixed by another member along with servicing the movement. Stay cool /Korn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now