bones Posted April 4, 2011 Report Share Posted April 4, 2011 Is it possible to convert an SEL bracelet to non-SEL? Reason being I have a TT 14k wrapped 93250 bracelet that I'd love to use for an older 16613 build and i'd rather not have to go down the gen route as it's a very well done bracelet. Link to comment Share on other sites More sharing options...
sneed12 Posted April 4, 2011 Report Share Posted April 4, 2011 Short answer, no. Especially if it's 14k wrapped. Link to comment Share on other sites More sharing options...
bones Posted April 4, 2011 Author Report Share Posted April 4, 2011 Balls... Anyone know where I can source a non-SEL 93250 TT 14k wrapped bracelet then? Link to comment Share on other sites More sharing options...
Dizzy Posted April 4, 2011 Report Share Posted April 4, 2011 Sure you can. Just pull the bracelet apart at the end links. Get the parts you need and put it back together. Easiest way is to get two bracelets and swap parts around. I used to take the noobmariner bracelets and convert them to non-SEL all the time. Its not easy to pull them apart without marking up the steel. You need to be really careful. Link to comment Share on other sites More sharing options...
bones Posted April 4, 2011 Author Report Share Posted April 4, 2011 How are the non-screw links held together? Are they just very tight fit pins? At least knowing someone else has done it gives me some confidence Link to comment Share on other sites More sharing options...
Dizzy Posted April 4, 2011 Report Share Posted April 4, 2011 Yep they are pressed together. You just need to pull the links apart sideways. Then you can hammer them back together or carefully use a vice. Link to comment Share on other sites More sharing options...
sneed12 Posted April 4, 2011 Report Share Posted April 4, 2011 Sure you can. Just pull the bracelet apart at the end links. Get the parts you need and put it back together. Easiest way is to get two bracelets and swap parts around. I used to take the noobmariner bracelets and convert them to non-SEL all the time. Its not easy to pull them apart without marking up the steel. You need to be really careful. That's true, but it's going to be really tough to do this on a gold-wrapped bracelet. You have to 1) not scratch through the finish and 2) find two bracelets where the color of the gold matches exactly. Link to comment Share on other sites More sharing options...
bones Posted April 4, 2011 Author Report Share Posted April 4, 2011 Well the mid-links are hollow 14k and the outsides of the links are solid SS, both of which can be polished back should minor marring happen during it. I might get some cheaper aftermarket 18k plated hollow end links and have a play about. The difference between the 18k and 14k is pretty negligable. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now