Removing Movement Aand Tachy Bezel on Portu 3714

[iluvhockey]

I got a new 3714 from Trevor and noticed in the new Portu the tachy bezel arre no longer held by four screws. The question I have is because of this how do I remove the movementon this watch. Let along the tachy bezel. Do I need to pry the beel off?

[Niqlndym]

If the bezel isn't held by screws, then it is simply press fit. It can be lifted with a case knife. Once the bezel is off, the dial and movement can be removed from the front.

To remove the inner tachy ring, you'll need to press out the crystal. Replacing the crystal without damaging the ring can be difficult, so be careful.

[Texski]

I have been using a dedicated bezel remover.

Clamp it in, and pry the case up.

I just got the rubber one, and I think it may work just fine.

The bezel is press fit onto a plastic ring ... it is the white one on the case.

The bezel is upside down, but yes, you do need to remove the crystal to get to the ring.

Not at all like IWC.