Josh's 1655 to 1675 dial fit

[cib0rgman]

I have this 1655 that a transformed into a 1675 I used a Gen dial but it seem to be a little tad small, about 1mm; could be possible that Josh's did not sent me the correct case. or is this a hit and miss. can someone tell the measurement of the dial.

Thanks

[Rolexaddict]

I have this 1655 that a transformed into a 1675 I used a Gen dial but it seem to be a little tad small, about 1mm; could be possible that Josh's did not sent me the correct case. or is this a hit and miss. can someone tell the measurement of the dial.

Thanks

all my 1675 dials are not same, but diameters are never under 26,9mm, max I have mesured are 27,2mm. They all fit in Josh's 1655. On the other hand, last 1655 I got from him don't have any more the right crown, they all come with a slightly bigger one.

If your dial is a refinished, its possible it was re-printed on a Sub or SD dial background which is arround 26,5mm. The guy who makes dial refinishing job for me wanted to sell me gen Sub dial plates and print the GMT 1675 texts, but these dials are slightly smaller and don't fit in the 1655 case, its a matter of 1/3 of a millimeter, its a few but enough to pass through the 1655 rehaut

[cib0rgman]

Thanks for the reply, my Dial is Gen and The Zigmeister retouched to fix the old markers that fell off and looks awesome now. it will not pass thru the 1655 rehaut but on one side i can see the edge of the dial. by a fraction of a mm