PPN Posted August 16, 2011 Report Share Posted August 16, 2011 I'm struggling with the PO purchase now. Actually, I've purchased a couple of POs previously, which turned out to be bad reps. But then I found this forum, and I now know better. ;-) But then I also noticed that Omega will soon be releasing a new version of the PO. As a matter of fact, it's already on their website. Ceramic bezel, squarer hour markers at 3/6/9, He moved to 10 position, etc. Does anyone know any seller is planning on repping the new PO? If so, should I wait for that, or should I pull the trigger on the current PO? Link to comment Share on other sites More sharing options...
PPN Posted August 17, 2011 Author Report Share Posted August 17, 2011 Does anyone know? Link to comment Share on other sites More sharing options...
Jkay Posted August 17, 2011 Report Share Posted August 17, 2011 I thought that watch had been out a year already. There are no high end reps of it. There may be a few bad reps. Link to comment Share on other sites More sharing options...
PPN Posted August 17, 2011 Author Report Share Posted August 17, 2011 I thought that watch had been out a year already. There are no high end reps of it. There may be a few bad reps. I'm not sure if it's been out for a year. I know it was announced at the latest Basel, but local ADs and boutiques don't even have it yet. Do you know if any high end manufacturers have plans to rep this model? Link to comment Share on other sites More sharing options...
correctime Posted August 17, 2011 Report Share Posted August 17, 2011 (edited) A high quality Liquid Metal rep should most definately be considered...but it's not likely to be able to be repped acurrately I'd say go for the 5th generation 42mm PO or the 45mm UPO that's currently available. Ofrei or cousins.uk have all the parts needed to go a VERY nice Franken for about 1k plus labor to whoever does the part swapping. Edited August 17, 2011 by correctime Link to comment Share on other sites More sharing options...
PPN Posted August 17, 2011 Author Report Share Posted August 17, 2011 A high quality Liquid Metal rep should most definately be considered...but it's not likely to be able to be repped acurrately I'd say go for the 5th generation 42mm PO or the 45mm UPO that's currently available. Ofrei or cousins.uk have all the parts needed to go a VERY nice Franken for about 1k plus labor to whoever does the part swapping. So there is no UPO for the 42mm version yet? What's missing before it's considered ultimate? Link to comment Share on other sites More sharing options...
plaifender Posted August 17, 2011 Report Share Posted August 17, 2011 PPN, despite your misinformation, this watch did not come out at the latest Basel.. It came out at Basel 2010 and was already being produced in 2009. My local boutique here IN madrid, spain got these watches within a month of Omega releasing them. And YES, it is repped. Been repped for over a year. It's not a very good version though: The most important aspect of this watch is the "liquid metal" that is seamlessly integrated into the ceramic bezel. Doubt that a rep factory could rep this effect accurately. http://www.youtube.com/watch?v=mZcsWVqLC5I Link to comment Share on other sites More sharing options...
PPN Posted August 17, 2011 Author Report Share Posted August 17, 2011 (edited) PPN, despite your misinformation, this watch did not come out at the latest Basel.. It came out at Basel 2010 and was already being produced in 2009. My local boutique here IN madrid, spain got these watches within a month of Omega releasing them. And YES, it is repped. Been repped for over a year. It's not a very good version though: The most important aspect of this watch is the "liquid metal" that is seamlessly integrated into the ceramic bezel. Doubt that a rep factory could rep this effect accurately. http://www.youtube.com/watch?v=mZcsWVqLC5I I'm no expert, but I believe the model you're referring to was a limited edition PO that was shown at Basel 2010 (starting with 222). The hour markers hadn't been updated yet to a more square shape and there was no display caseback. The one I'm referring to is the all new mainstream PO (starting with a 232), shown at this year's Basel. New hour markers, and display caseback. Hopefully we'll see a good rep of this soon. Having the He valve at the 10 position now should make the manufacturers happy. Edited August 17, 2011 by PPN Link to comment Share on other sites More sharing options...
plaifender Posted August 17, 2011 Report Share Posted August 17, 2011 I'm no expert, but I believe the model you're referring to was a limited edition PO that was shown at Basel 2010 (starting with 222). The hour markers hadn't been updated yet to a more square shape and there was no display caseback. The one I'm referring to is the all new mainstream PO (starting with a 232), shown at this year's Basel. New hour markers, and display caseback. Hopefully we'll see a good rep of this soon. Having the He valve at the 10 position now should make the manufacturers happy. Interesting.. Just looking at Omega's website and you're right that there's a new version with He valve aligned at 10. Not sure if this is the mainstream version or not, as they still also have the classic stainless steel version with white dial writing and black bezel insert. The new version looks a lot like the Liquid metal version just in 45.5mm size. Link to comment Share on other sites More sharing options...
PPN Posted August 17, 2011 Author Report Share Posted August 17, 2011 Interesting.. Just looking at Omega's website and you're right that there's a new version with He valve aligned at 10. Not sure if this is the mainstream version or not, as they still also have the classic stainless steel version with white dial writing and black bezel insert. The new version looks a lot like the Liquid metal version just in 45.5mm size. It's also available in 42mm. Don't forget the hour markers have been updated as well. Link to comment Share on other sites More sharing options...
maxman Posted August 17, 2011 Report Share Posted August 17, 2011 Im really suprised that they dont have a high end rep of this yet. When you consider how well the factories have reped the ceramic bezels on the more resent DSSD,I thought this was a no brainer. http://www.youtube.com/watch?v=mZcsWVqLC5I Link to comment Share on other sites More sharing options...
Jkay Posted August 17, 2011 Report Share Posted August 17, 2011 Well ... the factorys' imitation of the dssd bezel is far from perfect and the LM bezel would be even harder to get right, in my opinion. Rolex vapor-deposits platinum over the entire dssd bezel insert and then polishes away all the platinum except for what was captured in the recessed numerals. The rep factories simulate this with some grey paint ... The Omega liquid metal insert is different in that the entire numeral is filled with metal alloy, not just a thin vapor deposit, so the numeral is flush with the bezel insert's surface. Link to comment Share on other sites More sharing options...
maxman Posted August 17, 2011 Report Share Posted August 17, 2011 Well ... the factorys' imitation of the dssd bezel is far from perfect and the LM bezel would be even harder to get right, in my opinion. Rolex vapor-deposits platinum over the entire dssd bezel insert and then polishes away all the platinum except for what was captured in the recessed numerals. The rep factories simulate this with some grey paint ... The Omega liquid metal insert is different in that the entire numeral is filled with metal alloy, not just a thin vapor deposit, so the numeral is flush with the bezel insert's surface. I agree that the DSSD bezel In not perfect but pretty dam good IMO. I feel that the factories could also do a desent bezel on the Omega, time well tell. Link to comment Share on other sites More sharing options...
Jkay Posted August 17, 2011 Report Share Posted August 17, 2011 I hope you are right. Link to comment Share on other sites More sharing options...
vafarmer70 Posted August 17, 2011 Report Share Posted August 17, 2011 I agree that the DSSD bezel In not perfect but pretty dam good IMO. I feel that the factories could also do a desent bezel on the Omega, time well tell. I think they could as well. I think they have lots of the other ones built up to move first. Link to comment Share on other sites More sharing options...
cobra8272 Posted August 17, 2011 Report Share Posted August 17, 2011 Don't wait for the New Rep as it seems to take 3 or 4 versions to get an ultimate . The 42 or 45 UPO is very good and a pleasure to own. Pull the trigger now! Link to comment Share on other sites More sharing options...
vafarmer70 Posted August 17, 2011 Report Share Posted August 17, 2011 Yeah you should get the one for sale in the sales section Link to comment Share on other sites More sharing options...
maxman Posted August 17, 2011 Report Share Posted August 17, 2011 Yeah you should get the one for sale in the sales section Not a bad Idea Link to comment Share on other sites More sharing options...
PPN Posted August 17, 2011 Author Report Share Posted August 17, 2011 Yeah you should get the one for sale in the sales section I'll have to take a look! Link to comment Share on other sites More sharing options...
PPN Posted August 17, 2011 Author Report Share Posted August 17, 2011 Don't wait for the New Rep as it seems to take 3 or 4 versions to get an ultimate . The 42 or 45 UPO is very good and a pleasure to own. Pull the trigger now! How long did it take the current PO to get to ultimate status? Link to comment Share on other sites More sharing options...
Jkay Posted August 17, 2011 Report Share Posted August 17, 2011 3 years ? Link to comment Share on other sites More sharing options...
plaifender Posted August 17, 2011 Report Share Posted August 17, 2011 3 years ? I'd say more like 6 or 7 years. the clown feet UPO came out in 2006, that wasn't even corrected until a few months ago. Link to comment Share on other sites More sharing options...
PPN Posted August 17, 2011 Author Report Share Posted August 17, 2011 3 years ? I'd say more like 6 or 7 years. the clown feet UPO came out in 2006, that wasn't even corrected until a few months ago. Wow, that's quite a while. But that was also because the PO was a completely new model. For incremental changes, like on this new PO, hopefully it won't take that long. Link to comment Share on other sites More sharing options...
plaifender Posted August 18, 2011 Report Share Posted August 18, 2011 Wow, that's quite a while. But that was also because the PO was a completely new model. For incremental changes, like on this new PO, hopefully it won't take that long. Before the UPO i think there was a V2 model that had incorrect HE valve and case shape. So the UPO was NOT a new model.. just another step in a long line of changes. The only thing I'm trying to say is that sometimes it takes just that long for incremental changes (like the correction of "happy feet" logo) Link to comment Share on other sites More sharing options...
PPN Posted August 18, 2011 Author Report Share Posted August 18, 2011 Before the UPO i think there was a V2 model that had incorrect HE valve and case shape. So the UPO was NOT a new model.. just another step in a long line of changes. The only thing I'm trying to say is that sometimes it takes just that long for incremental changes (like the correction of "happy feet" logo) I agree, buddy. But I think you misunderstood what I meant. What I was trying to say is that the gen PO was a new model when it first came out. So the rep factories needed to go through a lot of iterations to rep it correctly. With the new gen PO, there are only incremental changes. So my guess is that it won't take the factories another 3-6 years to get the new one repped correctly. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now