CPTony Posted October 8, 2011 Report Posted October 8, 2011 always been in love with the Submersible 025, the waffle dial is terrific! However, it seems quite impossible to find a rep on the trust websites...why is that difficult? is it not popular or I'm the only one liking it? any advice is appreciated!
StormTooper4 Posted October 8, 2011 Report Posted October 8, 2011 I don't think there was an other version from the Cartel. So this is it. I have his 24A they are really nice watches
wat44 Posted October 8, 2011 Report Posted October 8, 2011 There are a few submersibles available - 024 243 194 at least
PeteM Posted October 9, 2011 Report Posted October 9, 2011 The biggest problem with DSNs for me is the crown position, it sits far to low in the CG. Ie there is more of it below rather than above. However I do think Vac or Sead can source pretty reasonable versions and mod them as required. Though all of them have pretty big flaws if that is something that will bother you ...
CPTony Posted October 20, 2011 Author Report Posted October 20, 2011 The biggest problem with DSNs for me is the crown position, it sits far to low in the CG. Ie there is more of it below rather than above. However I do think Vac or Sead can source pretty reasonable versions and mod them as required. Though all of them have pretty big flaws if that is something that will bother you ... big flaws? maybe the dial? should i go for a PAM024 instead? are those more accurate? tnx
vootzilla Posted October 21, 2011 Report Posted October 21, 2011 Same construction btw 24 and 25 from dsn. Used to hv his 24A with all the mods but feels too heavy on my tiny wrist. Might give one more try on 25 light titanium too.
justlounging Posted October 21, 2011 Report Posted October 21, 2011 25A & 25D is a sub to have...commands big presence yet retaining the lightness of titanium... yes the crown does seat a little low (about 0.5-1mm) but not very noticable.. Here's mine: Contact Davidsen...i believe he changed the crown on the 25 and 24s to the slightly thicker one..
CPTony Posted October 21, 2011 Author Report Posted October 21, 2011 @justlounging : nice watch there! do u think the CG from Sead can replace the one from DSN ? is it difficult to change or is it something everybody can do?
tominjo Posted October 21, 2011 Report Posted October 21, 2011 do u think the CG from Sead can replace the one from DSN ? is it difficult to change or is it something everybody can do? No, it's not difficult to change CG...easy job. The question is will Sead's CG sit on DSN case without bigger modifications (like sanding CG feets).I think no.
StormTooper4 Posted October 21, 2011 Report Posted October 21, 2011 @justlounging : nice watch there! do u think the CG from Sead can replace the one from DSN ? is it difficult to change or is it something everybody can do? Whats wrong the CG? the DSN CG is really good why change it ?
justlounging Posted October 24, 2011 Report Posted October 24, 2011 Comparing DSN's CG to Sead's CG, it is slightly thinner and not as accurate compared with the gen..Sead's CG will give a much better overall appearance to the watch..however having said that, there will some filing necessary to make the CG fit to the case OR the case to the CG (depending on which you prefer to file)..
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now