irolexu Posted October 24, 2011 Report Share Posted October 24, 2011 I just received a gen president from a buddy of mine who broke the crystal and I was gonna replace with it with a new one I have lying around and noticed some moisture under the glass...I am not big in the movement department but the watch is running fine. I am not sure how to approach the whole moisture under the glass. is a little a real bad sign or is it something that can be fixed real easy with out damage to the watch? not sure if I should take it in for an over-haul while I have it in my possession. thought I would ask you guys! Would love to hear from the rolex experts as I value their opinion greatly in this matter Link to comment Share on other sites More sharing options...
automatico Posted October 24, 2011 Report Share Posted October 24, 2011 The Good...If it runs all right, it is probably Ok. The Bad... The first thing to rust is usually the stem so look at it and also check for rusty screw heads. The Ugly...Look for moisture dots on the dial. If it 'rained' in it...you might have trouble because 'rain runs down the drain'. You can place the watch under a light bulb for a while to dry it out...not very hot or it will fry the oil. It probably did not leak any more than the average replica...Ha! Free advice...do not get in the middle of a rolex repair job if it needs movement service/parts. Let the owner deal with it. I have been screwed/held responsible by getting in the middle of rolex repair jobs while just trying to help. Now when someone asks if I work on rolex watches, my reply is... "Only if it belongs to me." I am not an expert nor do I play one on TV. Link to comment Share on other sites More sharing options...
freddy333 Posted October 24, 2011 Report Share Posted October 24, 2011 In general, I agree with automatico's comments. But I would add that if the crystal is cracked, moisture is a likely result. If the moisture just appeared, you should be able to dry it out. But if it has been there for more than a few hours, internal damage may have already occurred. Link to comment Share on other sites More sharing options...
irolexu Posted October 24, 2011 Author Report Share Posted October 24, 2011 Well I will definitely take a look around for rust and see what's the deal thanks for the advice! We are selling gen rolexs and this one we got a steal for the cracked crystal also have a gen 16610 on the way Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now