Rolexman Posted October 28, 2006 Report Share Posted October 28, 2006 Dear The Zigmeister, I received an Omega SMP with the 28800 BPH Asian 7750. Normally when unscrewwing the crown you feel this 'popping' feeling when the crown is completely unscrewed. It then is in the hand winding position. I don't really feel this pop. The crown just unscrews and then it is in the hand winding position.... Now here's the real problem: When hand winding the stem 'slips'. I don't know what else to call it? I can wind it 1 or 2 turns and then it slips, doing nothing just turning. Winding, slipping, winding, slipping etc... Is there something wrong with the movement. Everyhing works fine, chronograph, resetting, timesetting etc. Thanks, Mark Link to comment Share on other sites More sharing options...
GhostfaceZX Posted October 29, 2006 Report Share Posted October 29, 2006 Dear The Zigmeister, I received an Omega SMP with the 28800 BPH Asian 7750. Normally when unscrewwing the crown you feel this 'popping' feeling when the crown is completely unscrewed. It then is in the hand winding position. I don't really feel this pop. The crown just unscrews and then it is in the hand winding position.... Now here's the real problem: When hand winding the stem 'slips'. I don't know what else to call it? I can wind it 1 or 2 turns and then it slips, doing nothing just turning. Winding, slipping, winding, slipping etc... Is there something wrong with the movement. Everyhing works fine, chronograph, resetting, timesetting etc. Thanks, Mark Mine does the same thing - put some slight pulling (away from movement) pressure on the crown while you're winding and it should hold. Link to comment Share on other sites More sharing options...
RWG Technical Posted October 29, 2006 Report Share Posted October 29, 2006 What he said...the crown is slipping...no fix other than installing a new crown. Since it's an auto, best to keep handwinding to a minimum, as it hard on the crown. RG Link to comment Share on other sites More sharing options...
watchlover321 Posted October 30, 2006 Report Share Posted October 30, 2006 Since it's an auto, best to keep handwinding to a minimum, as it hard on the crown. Uh-oh.. I like to handwind my hand-windable autos before use... I guess I have to stop that habit Link to comment Share on other sites More sharing options...
flavor flav Posted October 30, 2006 Report Share Posted October 30, 2006 the crown is spring loaded and the not designed too well. mine does the same. pull it out a bit after you unscrew it and it will work. Link to comment Share on other sites More sharing options...
Rolexman Posted October 30, 2006 Author Report Share Posted October 30, 2006 thanks guys!! Link to comment Share on other sites More sharing options...
RWG Technical Posted October 30, 2006 Report Share Posted October 30, 2006 Uh-oh.. I like to handwind my hand-windable autos before use... I guess I have to stop that habit It's not a big problem, if you follow a couple of suggestions, wind slowly (to prevent damage to the click wheels in the autowinder), and only wind enough to get the watch running... RG Link to comment Share on other sites More sharing options...
watchlover321 Posted October 30, 2006 Report Share Posted October 30, 2006 Ahh.. these are good suggestions. Thanks The Zigmeister! It's not a big problem, if you follow a couple of suggestions, wind slowly (to prevent damage to the click wheels in the autowinder), and only wind enough to get the watch running... RG Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now