offshore Posted February 29, 2012 Report Share Posted February 29, 2012 @JK, Pins are on their way. Those pins from the Tags, and i think some omega, are the solid pin with the tube style collett in the centre? Much harder to push than normal split style pins, and yes, you need a long pin to push them out, because you must get an end past the collett in the centre, so an 18mm bracelet needs at least 10 -12mm push pin. Diameter of the pusher also can play a part in degree of difficulty. O/S Quote Link to comment Share on other sites More sharing options...
Jkay Posted February 29, 2012 Author Report Share Posted February 29, 2012 Yes. The infamous collett which drives UPO and TAG owners insane. thanks again. OH, and Cougar .. this thing needs AR and a re-lume if Im going to keep it. For such an expensive 3-handed watch, it needs those things. It's beautifully made .. but needs those things. Quote Link to comment Share on other sites More sharing options...
cougar1 Posted March 1, 2012 Report Share Posted March 1, 2012 OH, and Cougar .. this thing needs AR and a re-lume if Im going to keep it. For such an expensive 3-handed watch, it needs those things. It's beautifully made .. but needs those things. It would superb with a relume and double ar, afaik though the gen only has single sided inner AR and even though gen lume is obviously better than rep, it's not exceptional on the gen either, nothing like say gen smp lume etc. It would look better than gen with double ar and a relume job! Quote Link to comment Share on other sites More sharing options...
Jkay Posted March 1, 2012 Author Report Share Posted March 1, 2012 It would superb with a relume and double ar I sent mail to vacuum, and the watch is going to him for AR, lume and 10ATM pressure testing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.