statikman Posted June 13, 2012 Report Posted June 13, 2012 (edited) I received this from Angus today and it made some pretty bad rattling sounds. Duct taped the CB and here I am. Fixable or send it back. I know nothing. A quick step by step? Edited June 13, 2012 by statikman
StormTooper4 Posted June 13, 2012 Report Posted June 13, 2012 Just push it back on , easy peasy. I think the clip should go on after the rotor
statikman Posted June 13, 2012 Author Report Posted June 13, 2012 Tried it . It won't stay on. Thanks though.
Rolexman Posted June 13, 2012 Report Posted June 13, 2012 Don't push it on!!! The rotor and bearing are probably press fitted and you will disform the rotor or worse damage the auto wind bridge. From the pics it seems the bearing has "saw" teeth, which indicates the press fit system. Although the ring indicates a "twist-lock" system. Best thing to do is remove the bearing and floating bearing ring. It is hold down by one screw. Than make a new close up pic with rotor and bearing. Don't send it back. If you can't fix it the best thing is to ask for a new rotor. Mark.
statikman Posted June 13, 2012 Author Report Posted June 13, 2012 (edited) Is this what you meant? Edited June 13, 2012 by statikman
Rolexman Posted June 13, 2012 Report Posted June 13, 2012 Is this what you meant? No. A shot of the rotor and bearing.
buffedupboy Posted June 13, 2012 Report Posted June 13, 2012 It's shod, yes it is press-fit together but you are missing some parts which are likely inside your movement somewhere.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now