bpolo Posted June 21, 2012 Report Posted June 21, 2012 (edited) Hi, In my excitement to wear my new tc sub, I assembled the bracelet, as out comes in 3 pieces.. Two sides of links, and the deployment clasp with divers extension.. Anyhow I removed 1 link from each side to make it smaller for my wrist, and I realize now I removed the link with the little round circle on it, that you press to release the diver extension.. Its a different looking link as it doesn't have the t shape its just a rectangle.. Now for the life of me I can't figure out how to put it back. Any help would be appreciated. I know its supposed to be the last link before the link that had the notch in it that locks onto the bar to keep the diver extension in place. Heres a photo of the link. pardon the horrible pic. Also , I may have did it wrong altogether, but the bracelet came with arrows pointing out on the stickers.. I faced the arrows toward the crown side of the watch when deciding which set of links went on the top of the watch, and which set went on bottom..I wish he wouldve included instructions.. Edited June 21, 2012 by bpolo
woof* Posted June 21, 2012 Report Posted June 21, 2012 That link, belongs as the third link from the clasp/extension end. It should be resting inside the clasp. The dot/button is where you press to pop out the extension. You need to put it back and start over. Here's a quick pic to show you where it belongs
bpolo Posted June 21, 2012 Author Report Posted June 21, 2012 Do you know what the red arrows meant on the new bracelet plastic covering. Were they meant to face in or out towards the crown? Thank you very much file the photo and help woof.. Regards
woof* Posted June 21, 2012 Report Posted June 21, 2012 Do you know what the red arrows meant on the new bracelet plastic covering. Were they meant to face in or out towards the crown? Thank you very much file the photo and help woof.. Regards No, I don't know....I ripped the stuff off. It sounds to me like you got them reversed though. I would take it all apart, put the extra links back on...then lay it out upside down so you see the "button" link goes where it is in my picture. If I remember right, the long end has the button link. Remember, in my pic...the extension is in there, folded underneath. Also in my pic, the bracelet is installed and the crown is facing me.
Justasgood Posted June 21, 2012 Report Posted June 21, 2012 All of this is irrelevant. The circle is just a reminder to press in that area to extend/open the diver's extension. It has no magical powers. I removed the link with circle an the extension works as it should. Stop over thinking this and enjoy your watch.
bpolo Posted June 21, 2012 Author Report Posted June 21, 2012 Again, does anyone know what the red arrows on the plastic covering on the bracelet means., Which way are they supposed to point? Does it matter which side you attach to the lugs?
dluddy Posted June 21, 2012 Report Posted June 21, 2012 Red arrow has to do with the direction the bracelet screws screw in or pins push in....
Justasgood Posted June 21, 2012 Report Posted June 21, 2012 The arrows simply show you where the edge is so you can remove it. Certainly not as important as the TRL on the caseback sticker.....I really hope yours had one.
Guest zeleni kukuruz Posted June 21, 2012 Report Posted June 21, 2012 I always thought that the red arrows meens "open plastic here" becuse the plastic have its opening right there.
bpolo Posted June 21, 2012 Author Report Posted June 21, 2012 Ok. I thought it was a guide, to show.which side to use. Even better, that they mean nothing important. What is a TRL on the caseback sticker? Sorry for dumb questions, I'm obviously new at this
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now