redwatch Posted June 23, 2012 Report Share Posted June 23, 2012 For the Navi builders out there, what is the installation order? I am really confused how this thing goes together. I noticed that underneath the slide rule there are three small screws holding the bezel/sliderule assembly down to the case. Is that supposed to be removed and is the movement/dial supposed to load in from the top? Any direction or info would be greatly appreciated!! Link to comment Share on other sites More sharing options...
sneed12 Posted June 23, 2012 Report Share Posted June 23, 2012 Uhh... it goes together the same way it came apart... In the immortal words of the Haynes manual, "assembly is the reverse of removal." Movement goes in the back. Link to comment Share on other sites More sharing options...
redwatch Posted June 23, 2012 Author Report Share Posted June 23, 2012 Uhh... it goes together the same way it came apart... In the immortal words of the Haynes manual, "assembly is the reverse of removal." Movement goes in the back. Thanks for the tip, but I bought this in pieces and never disassembled it. It doesn't appear as though the dial fits thru the back so it seems unlikely that the movement and dial assembly goes in that way. Link to comment Share on other sites More sharing options...
Rolexman Posted June 23, 2012 Report Share Posted June 23, 2012 First slide rule. Than dial and movement. The navi is not a front loader. You can install the crystal, bezel and slide rule the best all at once, as they are one piece. In that case you press the assembly on from the front. Link to comment Share on other sites More sharing options...
sneed12 Posted June 24, 2012 Report Share Posted June 24, 2012 Thanks for the tip, but I bought this in pieces and never disassembled it. It doesn't appear as though the dial fits thru the back so it seems unlikely that the movement and dial assembly goes in that way. I've never seen a front loading navi case. Can you post a pic? Link to comment Share on other sites More sharing options...
andreww Posted June 25, 2012 Report Share Posted June 25, 2012 Post pics Red. Are you sure all the pieces are from the original watch? Its not a gen dial is it? Link to comment Share on other sites More sharing options...
redwatch Posted June 25, 2012 Author Report Share Posted June 25, 2012 Post pics Red. Are you sure all the pieces are from the original watch? Its not a gen dial is it? Oh that's a good question. The dial I am playing with may very well be a gen. I got it as a part of the kit. That could explain the issue. Link to comment Share on other sites More sharing options...
andreww Posted June 25, 2012 Report Share Posted June 25, 2012 That would be the obvious answer. The gen dial is about 1mm too big and needs to be shaved to fit. Link to comment Share on other sites More sharing options...
maccaz Posted June 25, 2012 Report Share Posted June 25, 2012 Oh that's a good question. The dial I am playing with may very well be a gen. I got it as a part of the kit. That could explain the issue. Can w still see pics? Where did you get the kit I have been waiting for a decent one to come up FS. That would be the obvious answer. The gen dial is about 1mm too big and needs to be shaved to fit. Andrew, please sell me one of your Navis, your the Navitimer king. Link to comment Share on other sites More sharing options...
Rolexman Posted June 26, 2012 Report Share Posted June 26, 2012 Come on Red. This is nothing like you. Posting a thread and not returning to it Link to comment Share on other sites More sharing options...
redwatch Posted June 26, 2012 Author Report Share Posted June 26, 2012 Sorry guys. I am waiting for my camera battery to charge so I can snap some pics of the case set. Come on Red. This is nothing like you. Posting a thread and not returning to it I finally found a gen 2892 movement with a DD Chrono module that fits my Navitimer Spatiographe dial. I have a lot of work ahead of me, but the biggest hurdle seems to have been overcome. In the meantime, I have been playing with the case set with a few regular Navi dials, but it seems as though all the dials I have are gen. All of them are too big to fit through the case from the bottom. Link to comment Share on other sites More sharing options...
Rolexman Posted June 26, 2012 Report Share Posted June 26, 2012 All of them are too big to fit through the case from the bottom. Gen dials don't fit without modding unfortunately Link to comment Share on other sites More sharing options...
redwatch Posted June 26, 2012 Author Report Share Posted June 26, 2012 Gen dials don't fit without modding unfortunately The big question is, can the case be modified instead of the dial? Link to comment Share on other sites More sharing options...
Rolexman Posted June 26, 2012 Report Share Posted June 26, 2012 The big question is, can the case be modified instead of the dial? Nope. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now