cyphion Posted September 13, 2012 Report Share Posted September 13, 2012 So I was changing the insert on my GMT last night, and went in to far and popped the crystal. I know, rookie mistake. So seeing as to how I did this, I am going to replace the crystal with a Clark one. It is a 16700 built from the 16570 Explorer 2 case. I know that it needs the 295C2 crystal, but what about the gasket? Do I need a 2.5, 2.7, or 3.0mm one? Also, I know its a noob question, but where does the gasket go? Lastly, does anyone know where to get the little o-ring that goes in between the retaining ring and the case. Mine has seen better days. Thanks in advance for the help Sent from my Galaxy Nexus using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Tiyal Posted September 14, 2012 Report Share Posted September 14, 2012 Clark should have all the gaskets you need, see if you can get all three sizes for the crystal. I think it 2.7, they should be really cheap. Same with the gasket under the retainer, I just order a few sizes to ensure I get the right ones. Clark sells sets of three for around 5$ and ships faaast Good luck Quote Link to comment Share on other sites More sharing options...
cyphion Posted September 14, 2012 Author Report Share Posted September 14, 2012 Thank you, I think I found them on the Clark store, and I'm just waiting foe him to send me an invoice. Thanks again Sent from my Galaxy Nexus using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.