LeSentier Posted October 4, 2012 Report Share Posted October 4, 2012 Mates, Gents, Members, received my Noob PAM243 on rep Asso from Torobravo yesterday and [censored] - this is really a beauty and a monster. Promise to post pics here, but please let me ask a question: The lever does not sit thight on the CG, and it can be opened very easily. I remeber to read smthg about a hot glue fix, but can't find helpful results. Can anyone please explain the HG fix, or what can be done to thighten the lever. Can you give me some advice? Thx in advance J Quote Link to comment Share on other sites More sharing options...
hooky Posted October 4, 2012 Report Share Posted October 4, 2012 The hot glue fix is to use a electric glue gun, Put glue in the lever hole. Let it cool down. Put the lever back into the cg. Put the pin on top. Use a glue guns tip to heat the pin and slowly push it in place. It makes the lever be less loose. The glue method makes it sometimes a bit messy and sometimes leaves glue residu on the cg/lever. This is a better method btw: http://www.repgeek.com/showthread.php?t=91320 It is on repgeek, hope it is allowed to post. sorry admin if it is not Quote Link to comment Share on other sites More sharing options...
LeSentier Posted October 5, 2012 Author Report Share Posted October 5, 2012 Thank you, but I am not a member on RG. Can you probably copy & paste if it's not too much of work for you? Thank you! Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted October 6, 2012 Report Share Posted October 6, 2012 The hot glue fix is just for a the pin to lever tolereance, what you are describing is the lever not exerting enough force on the crown, in this case removing some metal from the feet of the crown guard feet where they join to the case is the solution. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.