projectologist Posted November 3, 2012 Report Posted November 3, 2012 I recently got inspired to finish up a 3646 after seeing this upcoming auction review... http://www.vintagepanerai.com/tag/dr-crott/ I decided to go with a hybrid combination of a Type C case (droopy top surface, flatter bottom surface) and a Type D bezel. I have seen this combination at a GTG with a RP dial. So far... • Silix case reshaped and lug wires will be shortened/re-bent (not going solid as I like to swap straps) • NW case back which will get a subtle bevel and full polish • Hixxy bezel (pic below shows it getting cut down just a little and bevel angle changed) • Gen Patent Oyster crown (thanks to PSofC) correct for the Type C case Still lots to do... dial and hands sitting in the wings. Here's my gen crown front and back (mine I inset into the pic from a ref. book with a gen Type C case documented). It's 6mm as compared to the more common Brevet style which is 7mm. It was a very lucky find There isn't a lot of metal to work with at the corner tips, so I was pretty happy that I was able to make them more defined.
Dlf Posted November 3, 2012 Report Posted November 3, 2012 Nice ingredients so far, what plexi are you going to use? A low dome? Look forward to the end results
projectologist Posted November 3, 2012 Author Report Posted November 3, 2012 Nice ingredients so far, what plexi are you going to use? A low dome? Look forward to the end results Thanks. The re-shaping was the hardest part. The rep cases are pretty far off. I'll go with the plexi in the pics. German-made, package isn't in front of me, Ster... or Stur.... something I believe. I have another from the same maker with a touch more rise overall.
Dlf Posted November 3, 2012 Report Posted November 3, 2012 Thanks. The re-shaping was the hardest part. The rep cases are pretty far off. I'll go with the plexi in the pics. German-made, package isn't in front of me, Ster... or Stur.... something I believe. I have another from the same maker with a touch more rise overall. Looks nice with that bezel type, mine is a NW tall bezel but the NW plexi low dome is too small in circumference .... I'd be interested in getting one for mine .
civic4982 Posted November 4, 2012 Report Posted November 4, 2012 Excellent looking projectologist! Any tips on the crown And tube fitment and where to get them? Thoughts on movement selection or dial yet?
projectologist Posted November 4, 2012 Author Report Posted November 4, 2012 Thanks! Using a dial I have left from a couple I got from a little dial project 2 years ago. Notice the correct ovalized "O" missing from most current effort RP dials. Actual lume color isn't quite as yellow as the pics. Going with a trouble-free Swiss 6497 and re-threading the stem to fit the gen Rolex crown. Tourby hands.
civic4982 Posted November 4, 2012 Report Posted November 4, 2012 Stellar!!!! I love the dial there and no I had no idea that the O on radiomir was more oval shaped. Gonna spend so,e time reviewing my collection of reference images now thanks for the knowledge! My 2 3646 builds are going under some "renovations" as well and I love the idea of that great crown. Can't wait to see more!
projectologist Posted November 4, 2012 Author Report Posted November 4, 2012 Here's a pic of a gen dial I got to photograph a couple of years ago for another project... The white dial wax was applied more thickly. The dial I have will probably end up getting stripped and recoated with a less grainy surface.
projectologist Posted November 4, 2012 Author Report Posted November 4, 2012 Humph Secrets from your brother? Back in the VDB era. Will make a good story over a couple of beers. The watch project itself has been laying around since 2010.
projectologist Posted November 5, 2012 Author Report Posted November 5, 2012 Sternkreuz Yes, that's the plexi manufacturer, thanks
PeteM Posted November 5, 2012 Report Posted November 5, 2012 (edited) Great work Rob.. OOI though mate.... I thought the crown (Brevet style) varied on some versions... I know Brevet just means 'copyright' or 'trademark' and thought that the crowns varied in size and knurling? Is that right or was it the Brevet style as above and then the different variations like yours? Nice work on the shaping...I know how hard this is mate...you done a great job...Its nice to see this sort of stuff outside the enigma that is VDB Edited November 5, 2012 by PeteM
Watchmeister Posted November 5, 2012 Report Posted November 5, 2012 R- Absolutely beautiful. Wear that one well.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now