watchguyoh Posted February 27, 2013 Report Share Posted February 27, 2013 I just received my QC pics...on the timegrapher pic...it's showing an Amplitude rating of 324...but all other readings were pretty good...should this be a concern to me?? Link to comment Share on other sites More sharing options...
martijnp Posted February 27, 2013 Report Share Posted February 27, 2013 Amplitude The measure of the amount of rotation in the swing of the balance wheel, in either direction. Amplitude is higher when a watch is lying flat and usually falls when the watch is in a vertical position, due to increased friction. Amplitude can also fall as the watch winds down and the mainspring delivers less power. Amplitude is a good indicator of the movements health and if is too high or too low, or that changes too much in different positions, can indicate a problem with the movement. great : 270-310 acceptable : 250-270 If higher / lower? Ask for a different watch or have your watch serviced Link to comment Share on other sites More sharing options...
watchguyoh Posted February 27, 2013 Author Report Share Posted February 27, 2013 Amplitude The measure of the amount of rotation in the swing of the balance wheel, in either direction. Amplitude is higher when a watch is lying flat and usually falls when the watch is in a vertical position, due to increased friction. Amplitude can also fall as the watch winds down and the mainspring delivers less power. Amplitude is a good indicator of the movements health and if is too high or too low, or that changes too much in different positions, can indicate a problem with the movement. great : 270-310 acceptable : 250-270 If higher / lower? Ask for a different watch or have your watch serviced Thanks Martijnp...I did read that thread, but just wanted to make sure before I declined the watch. Link to comment Share on other sites More sharing options...
SSTEEL Posted February 27, 2013 Report Share Posted February 27, 2013 Bugger, my QC showed 334 AMP. Time will tell. Link to comment Share on other sites More sharing options...
watchguyoh Posted February 27, 2013 Author Report Share Posted February 27, 2013 Ok, so the TD reponded with the following regarding the timegrapher results on the QC pics... Amp must be high .. You have the wrong info .... The higher the better ... I'm confused because of what I read on the post about Timegrapher results...Can someone chime in as to what is the correct reading for the AMP?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now