Super Avenger Timegrapher Question

[watchguyoh]

I just received my QC pics...on the timegrapher pic...it's showing an Amplitude rating of 324...but all other readings were pretty good...should this be a concern to me??

[martijnp]

Amplitude
The measure of the amount of rotation in the swing of the balance wheel, in either direction.
Amplitude is higher when a watch is lying flat and usually falls when the watch is in a vertical position, due to increased friction. Amplitude can also fall as the watch winds down and the mainspring delivers less power.
Amplitude is a good indicator of the movements health and if is too high or too low, or that changes too much in different positions, can indicate a problem with the movement.

great : 270-310
acceptable : 250-270

If higher / lower?
Ask for a different watch or have your watch serviced

 

[watchguyoh]

Amplitude

The measure of the amount of rotation in the swing of the balance wheel, in either direction.

Amplitude is higher when a watch is lying flat and usually falls when the watch is in a vertical position, due to increased friction. Amplitude can also fall as the watch winds down and the mainspring delivers less power.

Amplitude is a good indicator of the movements health and if is too high or too low, or that changes too much in different positions, can indicate a problem with the movement.

great : 270-310

acceptable : 250-270

If higher / lower?

Ask for a different watch or have your watch serviced

 

 

Thanks Martijnp...I did read that thread, but just wanted to make sure before I declined the watch. 

[SSTEEL]

Bugger, my QC showed 334 AMP.  Time will tell.

[watchguyoh]

Ok, so the TD reponded with the following regarding the timegrapher results on the QC pics...

 

 

 

Amp must be high .. You have the wrong info ....

 

 

 

The higher the better ...

 

 

 

I'm confused because of what I read on the post about Timegrapher results...Can someone chime in as to what is the correct reading for the AMP??