MJP Posted November 25, 2006 Report Share Posted November 25, 2006 I saw the tutorial on sizing them up, does anyone know if mine are smaller than gen? (They pop out sometimes). I wanted to size them up if so. Does anyone sell replacement cases maybe? Also are they supposed to go all the way through on a gen vintage? I saw a newer case for sale where they didnt go all the way through the case. Thanx dudes Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted November 25, 2006 Report Share Posted November 25, 2006 The lug holes have to be drilled to accept the 1.2mm ends of genuine springbars... (bars installed on an MBW 1680). Quote Link to comment Share on other sites More sharing options...
MJP Posted November 25, 2006 Author Report Share Posted November 25, 2006 The lug holes have to be drilled to accept the 1.2mm ends of genuine springbars... (bars installed on an MBW 1680). What size drill so you use? Quote Link to comment Share on other sites More sharing options...
thewightstuff Posted November 25, 2006 Report Share Posted November 25, 2006 1.2mm some use 1.3mm also to give more clearance Quote Link to comment Share on other sites More sharing options...
TwoTone Posted November 25, 2006 Report Share Posted November 25, 2006 What size drill so you use? The right size... TT Wife has always told me that Toddy's & Keyboards don't mix! Quote Link to comment Share on other sites More sharing options...
Heywood Posted November 25, 2006 Report Share Posted November 25, 2006 What size drill so you use? I've used 1.25 in the past, but will probably use 1.3 in the future for an easier fit. By the way, you will want to use cobalt drill bits. Quote Link to comment Share on other sites More sharing options...
MJP Posted November 25, 2006 Author Report Share Posted November 25, 2006 The right size... TT Wife has always told me that Toddy's & Keyboards don't mix! Ha Ha. I know it looks like a really stupid question after ubiquitous's post, but I knew there was more to it. Smartypants Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted November 25, 2006 Report Share Posted November 25, 2006 Indeed... 1.3mm will provide enough clearance for the bars to slide through without resistance Quote Link to comment Share on other sites More sharing options...
cskent69 Posted November 25, 2006 Report Share Posted November 25, 2006 What size drill so you use? Try Snap on Cobalt Drill bits, wire guage, number 55, I think. http://buy1.snapon.com/catalog/item.asp?P6...amp;dir=catalog Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.