faonmyea Posted October 24, 2013 Report Share Posted October 24, 2013 if not, what size would i have to drill them to accept gen springbars? Quote Link to comment Share on other sites More sharing options...
monkeypunch Posted October 24, 2013 Report Share Posted October 24, 2013 I drilled to 1.25mm on my 16013 and 1601 cases. The spring bars fit perfect. Quote Link to comment Share on other sites More sharing options...
faonmyea Posted October 24, 2013 Author Report Share Posted October 24, 2013 (edited) sorry for the ignorance. is that 1.25mm into the case or 1.25mm diameter? Edited October 24, 2013 by faonmyea Quote Link to comment Share on other sites More sharing options...
tomhorn Posted October 24, 2013 Report Share Posted October 24, 2013 diameter Quote Link to comment Share on other sites More sharing options...
If you see Kay Posted October 26, 2013 Report Share Posted October 26, 2013 The trustytime 1016 does have lug holes, but they are not gen spec. trying to enlarge them to gen spec size will not result in having gen spec spring bars fit, unless you want to put on a leather strap. the lug holes are too close to the case and not far out enough towards the end of the lug. The stock spring bar in the trusty 1016 is curved. You cannot drill out the trusty lug holes and fit gen spec spring bars and make it look gen spec. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.