watchguy51 Posted December 10, 2013 Report Share Posted December 10, 2013 I have an interesting project in the works right now, and I was wondering if anyone has the dimensions of a Rolex 5512/13 w/ pointed crown guards... or a gen/phong case to measure? I need every dimension of the mid-case and crown. Also, the dimensions of a Helenarou 6538 bezel [notches] would be very useful. Thanks everyone! Link to comment Share on other sites More sharing options...
dbane883 Posted December 10, 2013 Report Share Posted December 10, 2013 41.6mm Link to comment Share on other sites More sharing options...
watchguy51 Posted December 10, 2013 Author Report Share Posted December 10, 2013 Thanks you. The more details, the better. The length and width of the crown guards, the thickness of them on both ends... I'd like to be able to draw up a proper diagram 41.6mm Link to comment Share on other sites More sharing options...
dbane883 Posted December 10, 2013 Report Share Posted December 10, 2013 CGs are 3.0mm. Lug to lug is 47.3mm Link to comment Share on other sites More sharing options...
dbane883 Posted December 10, 2013 Report Share Posted December 10, 2013 CGs are 5.25 mm thick (dial to case back) at the base Link to comment Share on other sites More sharing options...
watchguy51 Posted December 11, 2013 Author Report Share Posted December 11, 2013 Thanks so much for the info. Do you have the width of a lug at different points? CGs are 5.25 mm thick (dial to case back) at the base Link to comment Share on other sites More sharing options...
watchguy51 Posted December 13, 2013 Author Report Share Posted December 13, 2013 Also, are the pointed crown guards angled more from the top than at the bottom? Or are they symmetrical? And how far do they protrude? Link to comment Share on other sites More sharing options...
dbane883 Posted December 13, 2013 Report Share Posted December 13, 2013 The tips of the peaks are collinear with the middle of the crown. Id say slightly north of center (toward the crystal side) Link to comment Share on other sites More sharing options...
watchguy51 Posted December 13, 2013 Author Report Share Posted December 13, 2013 An [hopefully] the last question, what is the width of the lugs at their thinnest and thickest points? Thanks again, this is all very useful! Link to comment Share on other sites More sharing options...
watchguy51 Posted December 15, 2013 Author Report Share Posted December 15, 2013 bump An [hopefully] the last question, what is the width of the lugs at their thinnest and thickest points? Thanks again, this is all very useful! Link to comment Share on other sites More sharing options...
watchguy51 Posted December 17, 2013 Author Report Share Posted December 17, 2013 bump Link to comment Share on other sites More sharing options...
cc33 Posted December 17, 2013 Report Share Posted December 17, 2013 The best approach may be to take very precise measurements from a gen 5512/3 and so the only approximating you would be doing is with the crown guards. There are hundreds of measurements needed for this and you shouldn't rely on others for the info if you want to do it right! Link to comment Share on other sites More sharing options...
watchguy51 Posted December 23, 2013 Author Report Share Posted December 23, 2013 These are the measurements I'm looking for: Width of the individual lugs at key points Width of the crown and the gap between the crown and the case. And the diameter of the crown is 7mm I believe? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now