Paneriwc321 Posted January 11, 2014 Report Share Posted January 11, 2014 Hi guys, attached is a photo of the dial of a rep 3799. It is a QC Picture, and I'm worried that the dial is not "aligned" or "straight". Take a note of the positions of the "11", the triangle, the "1", "5" and "7" as well as the rectangular markers at 3 o'clock and 9 o'clock positions. They don't seem to be quite aligned to the actual watch case itself and seem to be slightly left... These are pictures, not from any scam site, but have been sent to me after my order to check the quality of the watch. Ordered from tswatchltd already before, never had an issue like this (or any issue at all, actually). Would appreciate some quick opinions, so i can get back to Mark. PS. By no means do i want to criticize Mark or tswatchltd. I have only made great experiences with them. Its just that the dial of this watch just seems off-set PPS. The pictures are small, but I hope they are enough to be analysed. They were sent to me in no higher resolution than posted below. Thanks! Quote Link to comment Share on other sites More sharing options...
markiemark Posted January 11, 2014 Report Share Posted January 11, 2014 Looks pretty straight to me, but then again I had a few beers. Did he take the pics with a Nokia 1.3MP camera phone? Quote Link to comment Share on other sites More sharing options...
rhc22 Posted January 11, 2014 Report Share Posted January 11, 2014 I can't see what you are you are suggesting and I can be picky! I have the single chrono on at the moment and the position of the numbers look the same as mine. Personally I would accept it but it is your watch and your choice. Quote Link to comment Share on other sites More sharing options...
Paneriwc321 Posted January 11, 2014 Author Report Share Posted January 11, 2014 First of all thanks for the responses guys! What i mean is not the position of the numbers, but the position of the dial. It seems as if the dial has been turned slightly to the left. I just mentioned the numbers as a sort of reference point of the dial to the watch case. Quote Link to comment Share on other sites More sharing options...
astonjenks Posted January 11, 2014 Report Share Posted January 11, 2014 I personally have the same watch and think if you look at all the pushers and crowns this looks ok. The 2,4 and 10 plus the crown seem to line up. Regards AJ Quote Link to comment Share on other sites More sharing options...
rhc22 Posted January 11, 2014 Report Share Posted January 11, 2014 First of all thanks for the responses guys! What i mean is not the position of the numbers, but the position of the dial. It seems as if the dial has been turned slightly to the left. I just mentioned the numbers as a sort of reference point of the dial to the watch case. I don't see that. If you draw a line from the centers of the 10 oclock pusher and the 4 o'clock it looks pretty much bang on. I would just check though that the chrono hand in the sub dial at 6 centers as it is off in the picture and all the others are at zero. Quote Link to comment Share on other sites More sharing options...
mixmasterut Posted February 20, 2014 Report Share Posted February 20, 2014 That is one nice watch. On my list of to buys! Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.