irolexu Posted June 8, 2014 Report Posted June 8, 2014 I have a ceramic GMT master II and I also have a gen crystal I want to install, how do I do this? Whats the best method?
lofi Posted June 10, 2014 Report Posted June 10, 2014 I tried and gave up. I couldn't get the gasket to fit the gen crystal. I tried modifying a rep one and shaving it down but it wouldn't sit correctly.
freddy333 Posted June 10, 2014 Report Posted June 10, 2014 Remove the movement, press the existing xtal out from the inside (with your thumbs). In most cases, you will need to reuse the rep xtal gasket, so do not lose or tear it (the gen gasket may be too large to fit a rep case). You will probably need a rubber-jawed hobby vice or crystal press to press the gen xtal into the case. Clean xtal & reinstall movement. I think there are a couple of threads detailing the procedure that you can search out.
live1 Posted June 10, 2014 Report Posted June 10, 2014 u must and the rep xtal and be very very careful not to crush it in the press
irolexu Posted June 10, 2014 Author Report Posted June 10, 2014 There has to be a better way...so just pop it out from the back side and press it in from the front side? Will using a press crack the crystal? Seems like this way is highly risky
freddy333 Posted June 10, 2014 Report Posted June 10, 2014 so just pop it out from the back side and press it in from the front side? Will using a press crack the crystal? Yes & no, not if you know how to use a press. If in doubt, have a watchmaker install the xtal for you. Better safe than sorry.
irolexu Posted June 10, 2014 Author Report Posted June 10, 2014 Has anyone done this said technique of pressing it out from behind and installing from the front? I would feel much better if someone gave me step by step what they did to ensure a smooth instsll
live1 Posted June 10, 2014 Report Posted June 10, 2014 sorry i ment to say sand the rep gasket and be really careful with the press
panerai153 Posted June 12, 2014 Report Posted June 12, 2014 Take it to Matt!!! Sent from my iPad using Tapatalk
imajedi Posted June 12, 2014 Report Posted June 12, 2014 Has anyone done this said technique of pressing it out from behind and installing from the front? I would feel much better if someone gave me step by step what they did to ensure a smooth instsll Yes, pretty much everyone who's installed a crystal has because almost all of them install that way. I've done lots.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now