watchguyusa1 Posted August 4, 2014 Report Share Posted August 4, 2014 (edited) Hello gentleman, I mostly post over at rg and rwi, but I know there's more Daytona experts over here, Avitt,Akira, lhooq ,ubi are you around? Lol I am planning on modding a cartel 6263 like akira has done, I have all the tools required but missing the pusher tube tool, does anyone know which one of these is the correct one? So many thanks ! I have searched this forum and on google for 2 hours trying to find the answer,but no luck!http://www.ofrei.com/page576.html Edited August 4, 2014 by watchguyusa1 Quote Link to comment Share on other sites More sharing options...
lhooq Posted August 5, 2014 Report Share Posted August 5, 2014 I'm still kicking! But I didn't realize you needed a special tool for this procedure. Can't you just use a flat-head screwdriver to loosen the pusher from the inside of the case? Quote Link to comment Share on other sites More sharing options...
janeto72 Posted August 5, 2014 Report Share Posted August 5, 2014 no tool is available....disassemble the pusher thread the tube on by hand and then tighten with a piece of cloth over the vertical threads.Do not overtighten..or squeeze hard.You will damage the threads...then assemble the pusher...or unscrew the pusher all the way until it stops in the open position....and thread the pusher on the case like you are using it as a screwdiver...do not overtighten!..you will break the pusher. Quote Link to comment Share on other sites More sharing options...
watchguyusa1 Posted August 5, 2014 Author Report Share Posted August 5, 2014 OK guys thanks for the info ! I was under the impression that unless the correct tool is used the pusher tube can be damaged and unusable, but I know you guys have installed pushers before,so I'll use your advice Quote Link to comment Share on other sites More sharing options...
lhooq Posted August 5, 2014 Report Share Posted August 5, 2014 ...I know you guys have installed pushers before,so I'll use your advice Go with what J said. All of my Daytona labour is outsourced! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.