6263 pusher tool questions

[watchguyusa1]

Hello gentleman, I mostly post over at rg and rwi, but I know there's more Daytona experts over here, Avitt,Akira, lhooq ,ubi are you around? Lol

I am planning on modding a cartel 6263 like akira has done, I have all the tools required but missing the pusher tube tool, does anyone know which one of these is the correct one?

So many thanks !

I have searched this forum and on google for 2 hours trying to find the answer,but no luck!

http://www.ofrei.com/page576.html

Edited August 4, 2014 by watchguyusa1

[lhooq]

I'm still kicking!  But I didn't realize you needed a special tool for this procedure.  Can't you just use a flat-head screwdriver to loosen the pusher from the inside of the case?

[janeto72]

no tool is available....disassemble the pusher thread the tube on by hand and then tighten with a piece of cloth over the vertical threads.Do not overtighten..or squeeze hard.You will damage the threads...then assemble the pusher...or unscrew the pusher all the way until it stops in the open position....and thread the pusher  on the case like you are using it as a screwdiver...do not overtighten!..you will break the pusher.

[watchguyusa1]

OK guys thanks for the info ! I was under the impression that unless the correct tool is used the pusher tube can be damaged and unusable, but I know you guys have installed pushers before,so I'll use your advice

[lhooq]

...I know you guys have installed pushers before,so I'll use your advice

 

Go with what J said.  All of my Daytona labour is outsourced!