sharkman07 Posted January 14, 2015 Report Posted January 14, 2015 Sorry if this is a total newbie question. I went to put on my Fifty Fathoms and noticed the strap is loose on one corner, what do I need to order please, spring bars and what size? I have never changed the strap on a watch so sorry if this sounds like a really basic question. On the other three corners there is no hole, so not sure if this is a two piece spring bar on this watch? Photos attached for illustration, you can see the hole on one corner in the first, the other three are fine. Thanks for any advice given!
sharkman07 Posted January 14, 2015 Author Report Posted January 14, 2015 Ok so looks like I am missing a lug screw. Anyone know where to get one please?
Nightwatch Posted January 14, 2015 Report Posted January 14, 2015 Hi, You will need 1 or 2 Torx T3 drivers (1 to hold in place as the bar turns with the screw 1 to turn the screws on the other end). This is a hollow bar with a thread in the center of it. Cheapest/easiest way is a complete kit of screwdrivers for repairing smartphones & similar. Replace with 24mm lugbars like these: http://www.uhrband24.com/24-mm-c-25_733.html, I think 1.8mm should be fine. In the future it´s easy to change straps as the BP has lugholes. Note: I use these, reinforced in 22mm and they are a solid fit for several months from Cousins.UK: R19294 Rolex Type Spring Bar 22mm PACK*10 1 £1.95
sharkman07 Posted January 14, 2015 Author Report Posted January 14, 2015 Thank you very much, appreciated.
sharkman07 Posted January 15, 2015 Author Report Posted January 15, 2015 Anybody have one of these tiny torx screws sitting around? Have to say not very helpful response from TD's, very friendly when you are buying from them but not very helpful otherwise, I was told I should buy another watch and then I could get the part...
sharkman07 Posted January 15, 2015 Author Report Posted January 15, 2015 Toro Bravo to the rescue - thank you! Definitely better than the other TD's....
Nightwatch Posted January 15, 2015 Report Posted January 15, 2015 Good to hear that Toro helps, some time ago these were totally unavailable.
panerai153 Posted January 15, 2015 Report Posted January 15, 2015 Sounds like this may be something that every Fifty Fathoms owner should have as a spare or two.
sharkman07 Posted January 15, 2015 Author Report Posted January 15, 2015 I'm going to try the spring bar alternative too until the parts arrive. Thanks again to Toro, couldn't be a bigger difference to the other 'big name' who really annoyed me with his money grabbing attitude!
swdivad Posted January 16, 2015 Report Posted January 16, 2015 (edited) Hi, You will need 1 or 2 Torx T3 drivers (1 to hold in place as the bar turns with the screw 1 to turn the screws on the other end). This is a hollow bar with a thread in the center of it. Cheapest/easiest way is a complete kit of screwdrivers for repairing smartphones & similar. Replace with 24mm lugbars like these: http://www.uhrband24.com/24-mm-c-25_733.html, I think 1.8mm should be fine. In the future it´s easy to change straps as the BP has lugholes. Note: I use these, reinforced in 22mm and they are a solid fit for several months from Cousins.UK: R19294 Rolex Type Spring Bar 22mm PACK*10 1 £1.95 I lost my cap screws also... Actually, they are hex or allen type sockets 0.9mm, so you should use an allen key. Although the 24mm spring bars may work, the lug width on this watch is a really odd 23mm wide, so you would need the Ø1.8 mm here http://www.uhrband24.com/23-mm-c-25_821.html If you want to use the originals, I'd suggest some Loctite Blue 242 to keep losing them. Edited January 16, 2015 by swdivad
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now