Phong Daytona Case Help - Chrono Pushers

[gmg_3]

Hello, I need help with a daytona build. I removed the phong pushers and want to install gen rolex ones. I need the pusher tool and 2.50mm tap.

 

Anyone care to loan me theirs? Looking to keep this conus.

 

 

I have a Bergeon Water Proofer to loan in return!

[alligoat]

You probably ought to just buy the 2.5mm x .25 tap. Have you tried looking on line like at tool places- I bought a couple of the 3.0mm x .35 taps for like $6-7 each.

 

You didn't say which type of pusher you're installing, but either way, if the pusher has a slot in it, you just screw the pusher in from the inside of the case with a small screwdriver.

 

A pic of the pusher tool you're talking about would help

[gmg_3]

I need the following.. Will prob just purchase of no one has a set up..

1 - tap for 2.5mm

2 - Chrono tool for gen rolex pushers. See below. I have gen 24-p302 screw pushers. Star part measures 3.28-3.3mm

Link..

http://www.esslinger.com/chronographtubetool333mm.aspx

[misiekped]

I need the following.. Will prob just purchase of no one has a set up..

1 - tap for 2.5mm

2 - Chrono tool for gen rolex pushers. See below. I have gen 24-p302 screw pushers. Star part measures 3.28-3.3mm

Link..

http://www.esslinger.com/chronographtubetool333mm.aspx

This will work on your pusher

Sent from my iPhone using Tapatalk

[Ephry73]

St has them also. G, send me a PM if you can.