jfmiii Posted May 28, 2015 Report Share Posted May 28, 2015 My picture is leaving a lot to be desired, my apologies. Ive been collecting vintage Rolex for about 10 years now and have always been enamored with vintage Daytonas. The gens are totally out of my price range, and prob always will be. That being said, Ive gone a little nuts with the DW Daytonas, buying anything that comes up fairly indiscriminately. As such, I have two 6239s; one PN, one silver dial. The PN has a gen crystal and crown but is in dire need of some work. It keeps time, but the watch will not set the time, the chrono will no longer reset to zeros. The silver dial is running great but the minutes subdial does not reset to zero. Where can I get these serviced? Ive read DWs can be difficult to work on bc of the modified movement. Should I look at replacing the whole movement? What would a A7750 service vs movement replacement cost? If I'm looking at having to dump a ton of money into them, I may sell the PN as I dont like the look of it on my wrist as much as the silver dial. I really want a sigma or PN 6263 and a V72 might be the only option that satisfies me there. The 16800 and 1600 are gen Rolex for those that care. The 1600 is from 1970 and the 16800 is an '82. Thanks guys! Quote Link to comment Share on other sites More sharing options...
panerai153 Posted May 28, 2015 Report Share Posted May 28, 2015 First off where are you located? That will determine who may be recommended for service. In every instance in my experience, an ETA 7750 is a more reliable movement, but the configuration for Daytonas, the 7753 is pretty expensive. The seconds @9 a7750's are not bad if properly serviced. Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
jfmiii Posted May 28, 2015 Author Report Share Posted May 28, 2015 I am located in Chicago. Quote Link to comment Share on other sites More sharing options...
chaw6125 Posted May 28, 2015 Report Share Posted May 28, 2015 ETA 7753 is £700 from cousins. A7753 is £100. But I haven't heard good things about new Chinese 775X movements. Quote Link to comment Share on other sites More sharing options...
jfmiii Posted May 28, 2015 Author Report Share Posted May 28, 2015 ETA 7753 is £700 from cousins. A7753 is £100. But I haven't heard good things about new Chinese 775X movements. thanks for the feedback. what am i looking at for a service? are these difficult to service? Quote Link to comment Share on other sites More sharing options...
ceejay Posted May 28, 2015 Report Share Posted May 28, 2015 Properly serviced 775- movements are pretty good once serviced. Trouble is a proper service will cost twice the price of a new asian movement. If anything is broken on the asian then unless a swiss part fits (many do) then getting asian parts is nigh on impossible. They are a complicated and at times, frustrating movement to service. The Swiss 775- is a joy to work on Unless you want to pile money into them, then swap out the movements for new asians or...Sell me the PN Good luck whatever you decide, vintage Daytona's rock ! Quote Link to comment Share on other sites More sharing options...
panerai153 Posted May 28, 2015 Report Share Posted May 28, 2015 Properly serviced 775- movements are pretty good once serviced. Trouble is a proper service will cost twice the price of a new asian movement. If anything is broken on the asian then unless a swiss part fits (many do) then getting asian parts is nigh on impossible. They are a complicated and at times, frustrating movement to service. The Swiss 775- is a joy to work on Unless you want to pile money into them, then swap out the movements for new asians or...Sell me the PN Good luck whatever you decide, vintage Daytona's rock ! That' absolutely correct, and the big reason most watchsmiths won't touch the A7750's. Bad parts, lack of replacement parts all add up to more time, frustration and oft times a movement that is fixed, but something else breaks and the watchsmith gets blamed for a shoddy job! Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
philwongnz Posted May 30, 2015 Report Share Posted May 30, 2015 Just wondering, i didn't know the V72 fit a DW dial where it takes a a7750? As the sub dials at 6 sits lower than a V72. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.