irate03 Posted July 15, 2015 Report Share Posted July 15, 2015 I need to find a replacement plexi for my tiger concept 6538 case, the stock plexi cracked. I would like to find something that has as close to gen shape for a 6536 as possible. which is tricky in itself as there seem to be a variety used. The stock plexi has an outer diameter of 30.16mm and an inner diameter of 28.55mm the outer edge of the plexi seat/rehaut is 29.01mm and the inner diameter of the rotating bezel is 31.02mm this is the tiger concept case with the bezel that pushes on with a white plastic gasket. Link to comment Share on other sites More sharing options...
alligoat Posted July 15, 2015 Report Share Posted July 15, 2015 The important thing to remember is the plexi you're looking for is nowhere close to anything that would fit on a gen 6538 or 6536. It might be easiest to just order another Tiger concept watch to get a new crystal- or see if Tiger will send you a spare crystal. A T-17 fit on the 6536, 6538 and the 5510. A T-16 fit the 6536-1 and the 5508. But those would be hard to find- GS and Sternkruz apparently don't make them anymore Link to comment Share on other sites More sharing options...
djulink Posted July 15, 2015 Report Share Posted July 15, 2015 For the V3 I'm using, I found some replacement crystal (see here) but not sure they'll fit yours Link to comment Share on other sites More sharing options...
Ephry73 Posted July 16, 2015 Report Share Posted July 16, 2015 I have use the ofrei t19 and sand down(evenly and slowly) the lip that meets the case to reduce the height. This worked out great for two builds. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now