plexi replacements information request

[irate03]

I need to find a replacement plexi for my tiger concept 6538 case, the stock plexi cracked. I would like to find something that has as close to gen shape for a 6536 as possible.
which is tricky in itself as there seem to be a variety used.
 
The stock plexi has an outer diameter of 30.16mm and an inner diameter of 28.55mm
the outer edge of the plexi seat/rehaut is 29.01mm and the inner diameter of the rotating bezel is 31.02mm
this is the tiger concept case with the bezel that pushes on with a white plastic gasket.
 

 

[alligoat]

The important thing to remember is the plexi you're looking for is nowhere close to anything that would fit on a gen 6538 or 6536.

 

It might be easiest to just order another Tiger concept watch to get a new crystal- or see if Tiger will send you a spare crystal.

 

A T-17 fit on the 6536, 6538 and the 5510.

A T-16 fit the 6536-1 and the 5508.

But those would be hard to find- GS and Sternkruz apparently don't make them anymore

[djulink]

For the V3 I'm using, I found some replacement crystal (see here) but not sure they'll fit yours

[Ephry73]

I have use the ofrei t19 and sand down(evenly and slowly) the lip that meets the case to reduce the height. This worked out great for two builds.