swdivad Posted June 6, 2016 Report Share Posted June 6, 2016 Hi All... I know very little about Rolex, except some superficial information... anyway, I was at my watchmaker's today dropping off my poor cracked Blancpain FF bezel for replacement, luckily I was able to source one from Toro! :-) Anyway, he produced a genuine 16610 with no bezel, asking if I know where to get a suitable aftermarket bezel assy... Now, I don't know how much a new gen replacement would be, but I suppose it might be quite expensive, so I'll ask here if there are any suppliers that can deliver a top notch bezel assembly that would go onto a gen or what would be the best approach to replace this... Maybe an aftermarket assembly and a gen insert? I'm not sure, so any help from the experts would be appreciated! Cheers! D Quote Link to comment Share on other sites More sharing options...
alligoat Posted June 6, 2016 Report Share Posted June 6, 2016 StarTime Supply is probably a good bet. But they're in the USA so shipping might be a little bit. Also, Wholesale Outlet 990 on ebay probably has it and I've gotten stuff from JandK Watches- also on ebay. Rolex might not be too bad if they will just sell you the bezel and insert and not service the watch to boot- in the US, a service runs around $500 and most independents will do it for around $200. Never hurts to ask Rolex. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.