matty1 Posted March 9, 2017 Report Posted March 9, 2017 Hi All The pearl on my sub just fell out, I still have the pearl and there is no damage to the bezel. How would I go about putting it back in!? Failing that, anyone in the UK want to buy a sub.... Cheers!
Dawagner Posted March 9, 2017 Report Posted March 9, 2017 Pop off the bezel assembly (ring and insert) the epoxy the pearl back in.
RickFlorida Posted March 9, 2017 Report Posted March 9, 2017 May I ask why it's necessary to epoxy it with the bezel disassembled? I'm also about to install a pearl so I was curious. I assume so you can use a good amount on the back of pearl and insert with the bottom facing up and let it dry?
Dawagner Posted March 9, 2017 Report Posted March 9, 2017 I would put the epoxy on the rear of it so that none gets on the face of the bezel.
matty1 Posted March 10, 2017 Author Report Posted March 10, 2017 16 hours ago, Dawagner said: Pop off the bezel assembly (ring and insert) the epoxy the pearl back in. Thanks mate, not sure what epoxy is? Or how to pop off the bezel assembly! Is that fairly simple? Any vids you could link me? Thanks buddy.
Sogeha Posted March 10, 2017 Report Posted March 10, 2017 The usual method for getting the bezel off is to work a craft knife blade under the bezel at each lug in turn and gently work it up. You might want to put some tape on the lugs to protect them. Expoxy is a type of glue, you will get it easily enough in any DIY/craft shop.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now