Are A3132 and SH3132 dials compatible??

[Watchbuyer]

Trying to swap a BP a3132 dial into an ARF sh3132 movement. Will these directly fit? (Also, how much should a BP dial cost from a TD?)

[mymanmatt]

It's hard to answer that question. The SA3135 will take a gen dial. Most of the  A3135 that I have seen are a modified eta's. It's hard sometimes looking at the pictures of the movements to determine what the base is that they started with. There is no mistaking an SA or a yuki. They do dress some eta"s to look like a rolex. Feet position will tell you which movement you're working with.'Good luck

[Watchbuyer]

Thanks, will give it a go!

[hologramet]

Trying to swap a BP a3132 dial into an ARF sh3132 movement. Will these directly fit? (Also, how much should a BP dial cost from a TD?)

A3132 are generally 2836-2's, this one could be a 2824-2 considering it has no need for a quick date- function. It will however not have the dial feet placed as a modern Rolex... Sorry... But you could always cut the dial feet and fasten the dial with dial dots.

A BP dial is usually between 30-45 USD.


Skickat från min iPhone med Tapatalk

[Watchbuyer]

5 hours ago, hologramet said:

 

A3132 are generally 2836-2's, this one could be a 2824-2 considering it has no need for a quick date- function. It will however not have the dial feet placed as a modern Rolex... Sorry... But you could always cut the dial feet and fasten the dial with dial dots.

A BP dial is usually between 30-45 USD.


Skickat från min iPhone med Tapatalk

 

 

Thanks!- Do you know if a BP dial will fit directly into a JF Explorer I, or if it would need some trimming? (If it needs trimming, how much do you reckon a modder would charge?)