bbell6 Posted July 13, 2007 Report Share Posted July 13, 2007 I hadn't worn my genuine 16610 in about a week and it stopped. When I tried to set it, the hands started slipping and could feel and hear the a clicking noise as I turned the crown. I pushed the crown in and pulled it out and tried again. I finally got it set but only after repeating this process a few times. It winds and runs fine. I suppose I need to get it serviced, just wondering if anyone has ever had this experience. I posted this question on Time Zone and was told that it might just be the keyless works being a bit balky. I followed the suggestions and pulled the crown out with a bit more force and tried again. After the hands moved a little, it started slipping again. Any thoughts? Quote Link to comment Share on other sites More sharing options...
freddy333 Posted July 13, 2007 Report Share Posted July 13, 2007 Ziggy's the master blaster here, but it sounds like either a problem with the keyless works (maybe a bent clutch lever (this governs the stem's movement from mainspring winding to hand-setting)) or a duff mainspring. In either case, you should have it checked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.