rolexlover Posted August 10, 2007 Report Share Posted August 10, 2007 I just bought a new lady datejust watch for my sister. It runs about 30 minutes fast in 10 hours. So it's about 3 sec fast in 1 minute (60 sec.) Can it be regulated? What can cause the watch to run this fast? Thanks Link to comment Share on other sites More sharing options...
RWG Technical Posted August 10, 2007 Report Share Posted August 10, 2007 30 minutes in 10 hours, or over an hour in a day...that is extremely fast. My first thought is that the movement is either dry and not oiled, or the hairspring has two coils touching each other, or it's touching something. Full sweep of the regulator is aprox 30 minutes...so this would seem to be very excessive. It may be able to be regulated (the beat could also be out of adjustment) but you would need a timer to check it out and confirm the problem... RG Link to comment Share on other sites More sharing options...
piratedzeus Posted August 10, 2007 Report Share Posted August 10, 2007 Hey The Zigmeister,My watch (ran 5 month SUPER accurate) is since 1 day runniing so fast.... like 1minute per 5 minutes :Dany idea...?Movement is the uPO lite movement... this 28.800 thingy... miyota copy...whatever :/ Link to comment Share on other sites More sharing options...
rolexlover Posted August 10, 2007 Author Report Share Posted August 10, 2007 Thanks The Zigmeister. I just demag the watch yesterday and left it on the winder again overnight. Will time it again later today after work. It's an ETA movement BTW. A first quick look at the movement , it looks like new. Will examine the hairspring as well. Other option is sending it back to the dealer for service or replacement. Link to comment Share on other sites More sharing options...
RWG Technical Posted August 10, 2007 Report Share Posted August 10, 2007 Thanks Ziggy. I just demag the watch yesterday and left it on the winder again overnight. Will time it again later today after work. It's an ETA movement BTW. A first quick look at the movement , it looks like new. Will examine the hairspring as well. Other option is sending it back to the dealer for service or replacement. Other than the pivots, there is nothing magnetic in the movements anymore, certainly not the hairsprings, I would not think this is the cause. If it's an ETA, then I would guess that you don't have a hairspring problem, I have not seen a ETA auto with coils touching each other or anything else, they seem to be immune from this issue as the hairspring is quite stiff. It is probably an ETA 2671, which is a very small movement which needs delicate attention. I would guess dirty (maybe), under or over oiled (could be), or possibly the beat is out, but if it's out that much, the watch should never have started running on it's own. Having a close look at the balance, note the amplitude of the swings, and if possible checking it on the timer, should help isolate the problem. I always shy away from sending it back, I don't like the risks involved, or the time it takes. I would be curious to see what you find when you take the back off. RG Link to comment Share on other sites More sharing options...
Graman Posted September 9, 2007 Report Share Posted September 9, 2007 Hi The Zigmeister, I'm having the same problem - I picked up a 2671 ladies datejust at a street market in Malaysia...not bad quality, but I'm presuming it's run dry -It ran well for about a month, but then died (strangely on the same day my son dropped my Pam on the bathroom floor). It now stops running without warning, and runs about 7 seconds fast per hour. I've checked the balance spring, and seems fine....even oiled the staff and replaced the [censored] - still no issue with the balance, but it's pretty dead. I thought I might attempt a service, but I'm not confident enough at the moment to attempt. I realise you haven't done a tute on the 2671, however is there another movement I can look at that can guide me? cheers mate, Best, G Link to comment Share on other sites More sharing options...
section8 Posted October 15, 2007 Report Share Posted October 15, 2007 rather than post another thread I thought I'd post in this one. My DSN 177 started running lightning fast today. I'm talking 5 minutes an HOUR. The Zigmeister, this watch was previously serviced by you when it belonged to slai and it has been running like a top for over a month since he sold it to me. I didn't wear it all weekend, wound it up this morning and headed to work, halfway through the day I noticed how fast it was. Since it's been serviced, I guess the hairspring maybe? I didn't drop it or bang it on anything that I remember, not sure how I could have done that? Link to comment Share on other sites More sharing options...
RWG Technical Posted October 16, 2007 Report Share Posted October 16, 2007 rather than post another thread I thought I'd post in this one. My DSN 177 started running lightning fast today. I'm talking 5 minutes an HOUR. Ziggy, this watch was previously serviced by you when it belonged to slai and it has been running like a top for over a month since he sold it to me. I didn't wear it all weekend, wound it up this morning and headed to work, halfway through the day I noticed how fast it was. Since it's been serviced, I guess the hairspring maybe? I didn't drop it or bang it on anything that I remember, not sure how I could have done that? Most likely the hairspring has a couple of coils touching each other. It may correct itself on it's own, or maybe a swirl in the palm of your hand while running, or when stopped if that doesn't work. When the watch is stopped it doesn't take much movement to get the coils to touch each other due to movement. When it's running, it's much harder to get the coils to stick to each other. RG Link to comment Share on other sites More sharing options...
section8 Posted October 16, 2007 Report Share Posted October 16, 2007 Thanks for the reply The Zigmeister, I'll let it wind down and have a look at the hairspring to see. Link to comment Share on other sites More sharing options...
steve_acp Posted December 14, 2007 Report Share Posted December 14, 2007 I just got a beautiful 111h from DSN, and it was gaining 5 mins per hour. There were two turns of the hairspring coil going thru the regulator. I carefully unhooked both, and then reset the outer turn, and now all is perfect, and within a few seconds per day. Can this king of thing happen in transit? Link to comment Share on other sites More sharing options...
steve_acp Posted December 14, 2007 Report Share Posted December 14, 2007 (edited) oops, double post Edited December 14, 2007 by steve_acp Link to comment Share on other sites More sharing options...
alt.watch.obsessive Posted February 6, 2008 Report Share Posted February 6, 2008 Hi all, Sorry to revive an old post but I wanted to add my story. I recently received a PAM 217 from a fellow member that was gaining one hour every four when it arrived..yes, that's six hours fast a day! Not sure if he sold it due to this problem, or if it took a knock in the mail. Anyhow, I tried nudging the balance spring thinking the coils might be stuck...no luck. Then I noticed that the outer coil was not moving because it had actually looped out around the regulator (or whatever you call the thing that holds the end of the spring). It took a good (and I'm sure risky) push to free it and the watch is now accurate to about five seconds a day. Amazing. There is so much great information here! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now