piratedzeus Posted August 14, 2007 Report Share Posted August 14, 2007 How did you do it? AFAIK Sub bracelet edges should be smooth, right? (Pic, anyone?) The sides should be polished to bling, right? (Pic, anyone?) How did you do it? I tried once... and it did not come out well Link to comment Share on other sites More sharing options...
Dizzy Posted August 14, 2007 Report Share Posted August 14, 2007 to round the edges, file them with a small file then sand smooth with 400 and 600 grit sandpaper You can polish the sides if you want. its up to your personal taste. for the sides i would sand with 400 then 600 then 800 sandpaper then polish with a dremel tool last. Lonnie Link to comment Share on other sites More sharing options...
FxrAndy Posted August 14, 2007 Report Share Posted August 14, 2007 I did my noob bracelet the same way as above, 600 grade wet and dry paper (wet) on the sides and then polish with a dremel untill it gleams, took me about 1 hour total, it gets tricky when toy get to the end links as they can catch on the polishing mop so make sure you are not holding the bracelet in you hand, i used a bench vice lined with masking tape to stop it marking the bracelet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now