Jawo Posted October 20, 2007 Report Share Posted October 20, 2007 I have a Tag Link that is experiencing some problems with the chrono function. When it starts, it runs fine. When I reset it, the needle does not go back to 12. It is advanced forward. It keeps advancing forward everytime I start and stop it. Any ideas? Quote Link to comment Share on other sites More sharing options...
giorgio Posted October 20, 2007 Report Share Posted October 20, 2007 Sounds like the hand is slipping. If that's the case, I think the only fix is to take it apart, remove the hand, and glue the hand to the hand tube. Quote Link to comment Share on other sites More sharing options...
riffram Posted October 30, 2007 Report Share Posted October 30, 2007 Sounds like the hand is slipping. If that's the case, I think the only fix is to take it apart, remove the hand, and glue the hand to the hand tube. Don't think you're discribing a slipping hand--when a second's hand is loose, it doesn't behave like that. Your problem is likely internal to the movement--but not a hard fix for a watchsmith. Still, as long as you just let the chrons run, as I do, it won't matter a bit. Quote Link to comment Share on other sites More sharing options...
ajoesmith Posted October 30, 2007 Report Share Posted October 30, 2007 Don't think you're discribing a slipping hand--when a second's hand is loose, it doesn't behave like that. Yes it does, this is a common problem with chronos. Simple fix as Giorgio said, take the second hand off and using a dab of epoxy itll be fixed, easy fix for any watch guy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.