that_watch_guy Posted June 3, 2006 Report Share Posted June 3, 2006 I recently recieved a watch with a 2824-2 eta movement, but the hands are all frozen in place. The watch winds, but after opening the caseback I can see that nothing is moving. Anyone have any ideas as to an obvious and likely culprit? Link to comment Share on other sites More sharing options...
marrickvilleboy Posted June 3, 2006 Report Share Posted June 3, 2006 if the hands are caught, then the oscillator wont run. so make sure the hands are not catching on eachother or on a marker. Link to comment Share on other sites More sharing options...
that_watch_guy Posted June 4, 2006 Author Report Share Posted June 4, 2006 thanks so much for your input, I'll check it out! Link to comment Share on other sites More sharing options...
alligoat Posted June 5, 2006 Report Share Posted June 5, 2006 Or you could have something in the movement itself that is keeping it from running. Last month my GMT 2836 quit running. I noticed that the movement wasn't tight against the top of the case and so I opened the case back and saw that one of the tabs that holds the movement in place had broke and the part was lost in the movement apparently. My watchmaker took out two screws and removed the rotor and the part of the tab was stuck in between two gears. He took it out and voila, the movement started running again. He put the rotor back on, put in a new tab and I was ready to go. It took him less than two minutes to fix it! More than likely it's not a big problem, but it sure helps to have a watchmaker who will work on it! Good luck. Link to comment Share on other sites More sharing options...
r11co Posted June 6, 2006 Report Share Posted June 6, 2006 Proof that buying an ETA powered watch is no assurance of trouble-free ownership. You can't legislate against cack-handed assembly. Link to comment Share on other sites More sharing options...
supermanx Posted June 6, 2006 Report Share Posted June 6, 2006 Buying gen doesn't protect you either... just makes it easier to find a watch person to fix. Hopefully for the gen owner it is still under warranty, otherwise it will cost a lot more to fix it as well. Did I hear somewhere that panerai is no longer performing minor repairs without requiring a servicing at the same time. Link to comment Share on other sites More sharing options...
that_watch_guy Posted June 12, 2006 Author Report Share Posted June 12, 2006 I took this watch to my watchmaker finally, it turns out that there was a piece of straw (or hay or something) stuck inside the movement. Of all things that could go wrong. Cost me $10 to fix. Link to comment Share on other sites More sharing options...
gdaddy Posted June 12, 2006 Report Share Posted June 12, 2006 I took this watch to my watchmaker finally, it turns out that there was a piece of straw (or hay or something) stuck inside the movement. Of all things that could go wrong. Cost me $10 to fix. Where did you find this watchmaker. I can't find one that will open the case for $10. Link to comment Share on other sites More sharing options...
pizzanooo Posted June 12, 2006 Report Share Posted June 12, 2006 I took this watch to my watchmaker finally, it turns out that there was a piece of straw (or hay or something) stuck inside the movement. Of all things that could go wrong. Cost me $10 to fix. Quality control in the barn... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now