Tribal Posted December 5, 2007 Author Report Share Posted December 5, 2007 Indeed again Trib Mine is a december 2000 watch (P serie from 2000) and has a 93160A. SEL, flat and no numbers engraved on the end link. Congrats for your knowledge...crazy to know all these variations. You know Steph, I'm a Freak about it... How is it signed in the SEL's from your Gen SD... Thas also interesting Maybe if you get the SSD,you can put the bracelet on it if it fits the rep... Quote Link to comment Share on other sites More sharing options...
Stephane Posted December 5, 2007 Report Share Posted December 5, 2007 Nothing is written on the visible sid of the end link. Inside the sel, when bracelet is removed thus, it's 892 Quote Link to comment Share on other sites More sharing options...
poopypants Posted December 5, 2007 Report Share Posted December 5, 2007 The outer diameter is about 29,7 mm inner was about 28,4mm I think.... you must shape out the case with a lathe to right dimension to fit a better glass,then the thickness of the rehaut is visible like gen... I don't know the dimensions of the Gen SD Glass.. If anybody knows jump in..... But I think it can be done good to know... so now, the only piece of the puzzle is figuring out the diameter of the gen crystal... AND, if it is larger than 28.4mm then i need to find someone to lathe out the case! thanks for your help Tribal! PP Quote Link to comment Share on other sites More sharing options...
cskent69 Posted December 5, 2007 Report Share Posted December 5, 2007 Tribal and PP, and anyone else who cares: I have a genuine crystal for a modern Sea Dweller. Here are the pictures for you to compare. Sorry for the lousy photos - but I don't have the best setup. So now you know what I know. Yes - what you see on the side of the genuine crystal is right. There is a strange notch in the crystal (from the side on the bottom side. You can sort of see that in the third picture. Not sure if this will help with the rehaut look. Also - the best ruler I have is shown. Not sure if this helps much - but the size does seem to be in the ball park. Hope that this helps. I am gathering up all my SD mods for a visit to the Zigmaster. Would love any input. Quote Link to comment Share on other sites More sharing options...
poopypants Posted December 5, 2007 Report Share Posted December 5, 2007 so, the 25-285 model is for all three models > 16600, 16600T, 16660 judging by the pics... the notch in the OEM must be there for the OEM gasket... very interesting! never seen one of these up close... do you have the gasket?!?! PP Quote Link to comment Share on other sites More sharing options...
rosnik Posted December 5, 2007 Report Share Posted December 5, 2007 all three models > 16600, 16600T, 16660 sorry......... Do this "T" means that the case has no lug holes? Quote Link to comment Share on other sites More sharing options...
poopypants Posted December 5, 2007 Report Share Posted December 5, 2007 Do this "T" means that the case has no lug holes? according to rlxforums.com, that may be it... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.