Edge Posted June 10, 2006 Report Share Posted June 10, 2006 Right lads, I need some advice as to the best device for replacing the retaining ring on my MBW 1680. I was using a torch which was PERFECT, or at least I thought so, right up until I managed to break it, as is was a cheap torch with plastic and rubber. Any ideas, what do you guys use??? Randy don't be smart and post pics of your omega, I don't have one lol and it seems a bit steep to buy a watch just to replace retaining rings HAHAHA!!! So c'mon what you use??? Link to comment Share on other sites More sharing options...
ubiquitous Posted June 10, 2006 Report Share Posted June 10, 2006 Chris- You can use a crystal press ....Or an Omega case Seriously... If you have an old empty watch case (preferably around 40mm diameter in size), you can probably use that. With the caseback off, the case should fit around the Tropic and onto the ring just right. I just tried this with one of my practice Rolex rep cases, and it fit just as nicely as my Omega case that I use. Link to comment Share on other sites More sharing options...
Edge Posted June 10, 2006 Author Report Share Posted June 10, 2006 Chris- You can use a crystal press ....Or an Omega case Seriously... If you have an old empty watch case (preferably around 40mm diameter in size), you can probably use that. With the caseback off, the case should fit around the Tropic and onto the ring just right. I just tried this with one of my practice Rolex rep cases, and it fit just as nicely as my Omega case that I use. The only spare case that I have here is a cheap SD and I can't get it to fit. Currently don't have a crystal press either lol. Chris Link to comment Share on other sites More sharing options...
Cracker Posted June 10, 2006 Report Share Posted June 10, 2006 http://www.harborfreight.com/cpi/ctaf/Disp...temnumber=46479 Link to comment Share on other sites More sharing options...
leitztozeiss Posted June 10, 2006 Report Share Posted June 10, 2006 The only spare case that I have here is a cheap SD and I can't get it to fit. Currently don't have a crystal press either lol. Chris I used the bottom end cap of a D-Cell Maglite and a crystal press. The cap was a perfect fit over the T127 crystal and was deep enough to accomodate the height of the crystal. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now