Rolex Bezel replacement

[mendota]

I found my black Bezel on the floor and noted my submariner was without one. The diagnosis was easy.

Could someone tell me the way to replace it. Thanks.

[freddy333]

Most of them 'snap' on (or off) by hand. Have you tried just pressing it back on? That is as much as I can tell you based on what you told me.

[alligoat]

Genuine inserts- the black part- are friction fit and they are pressed into the bezel itself. If the bezel itself- the ss (or gold) part came off, it snaps on also- you just need to make sure you don't lose any of the miscellaneous parts that go with it.

But if you have a rep and the insert fell off, you're probably going to have to glue it back on to the bezel- a few drops of GS Hypo-cement or epoxy to the metal bezel and press the insert on- just make sure the bezel still turns and you don't glue it to the case.

[mendota]

Genuine inserts- the black part- are friction fit and they are pressed into the bezel itself. If the bezel itself- the ss (or gold) part came off, it snaps on also- you just need to make sure you don't lose any of the miscellaneous parts that go with it.

But if you have a rep and the insert fell off, you're probably going to have to glue it back on to the bezel- a few drops of GS Hypo-cement or epoxy to the metal bezel and press the insert on- just make sure the bezel still turns and you don't glue it to the case.

Thank you. I'll do what you suggest.