perry563 Posted April 22, 2008 Report Share Posted April 22, 2008 Just recieved a DeWit Academia in the mail this AM. WHAT A NICE WATCH!!!! The fit and finish is just about perfect cosmetically and so far telling time on the money. I do see two small issues that I would like those more knowledagble to comment upon.... 1) The Titaniam clasp tends to pop open the first and second time I try putting the watch on. After 2-3 tries it stays closed. 2) There is a minute chrono dial on the right side. I notice that the hand on this dial has a little "play" Of course it should stay EXACTLY on "30" (pointing straight up) when I am not useing the chrono function. However I can tap lightly the sides of the watch case and make the hand move ever so slightly to the right side of the top marker. Its slight but enough to show others that it looks like the watch has not reset perfectly to "30". Furthermore when the chrono is working the hand does not at times land perfectly on the next minute but instead is slightly "ahead" of the minute marker. Of course I can just tap the case and move the hand to the right position but any movement from my wrist and the hand moves again off center. Just to emphisize......its not off by much..its slight..maybe half the thickness of the markers but enough so that one can see that the marker is not fully centered under the hand. Thoughts anyone???? Link to comment Share on other sites More sharing options...
luisik Posted April 22, 2008 Report Share Posted April 22, 2008 I would contact your dealer because of that minute hand. Probably it can be easily repaired if you are skilled, but I wouldn't take the risk myself in such a nice watch. I think he should send you a replacement if he is one of the good honest guys. Link to comment Share on other sites More sharing options...
perry563 Posted April 22, 2008 Author Report Share Posted April 22, 2008 He is one of the good dealers. He tells me both issues are common. I can work on the clasp with some oil. The dial hand is only VERY slightly to the right. (like one half the thickness of a second mark on the dial) It certainly does bug me since I know it should be straight up and down like an arrow. I will play with the chrono the next few days and see if the issue somehow corrects itself. Link to comment Share on other sites More sharing options...
jockl1978 Posted April 24, 2008 Report Share Posted April 24, 2008 Hi, just tried it on my DeWitt, result: same issue with the 1/3 mm play in the minute counter - didn Link to comment Share on other sites More sharing options...
perry563 Posted April 24, 2008 Author Report Share Posted April 24, 2008 My HBB is fine also. If you tap the case slightly the hand will move...and yes its just like mine about one third of a mm but enough to make your blood pressure rise!!!! I LOVE the watch and wont send it back since most of the pictures I have seen show the same issue. Like most issues with reps the lay person will never notice so lets try to stop looking at it!! LOL Link to comment Share on other sites More sharing options...
pirvan Posted April 25, 2008 Report Share Posted April 25, 2008 mine is comingg!!!! Link to comment Share on other sites More sharing options...
szvwj Posted April 25, 2008 Report Share Posted April 25, 2008 Mine doesn't have the issue with the 1/3 mm play in the minute counter (I got mind from Josh... if that makes any difference). Regarding the Band... The clasp issue bugs me too. I don't know if it's a defect or a poor design. Just like jockl1978, I close both parts at the same time. I'd wear the watch every day, but those little band-release 'buttons' dig into my wrist. There's no fine adjustment. You have to cut the band to fit your wrist (hope you don't make a mistake) and live with that size.One last thing, I can't change the band because it requires a special tool (which I can't, yet, find). Beautiful watch, inferior band. Link to comment Share on other sites More sharing options...
perry563 Posted April 25, 2008 Author Report Share Posted April 25, 2008 Double check the hand on that right side dial. Tap the case side and see if it does not move ever so slightly. It looked fine to me also until I wore it a while. I think the band is fantastic. I was careful not to cut too much off and make it too tight on my wrist. Clasp needs some extra effort to close but I can live with that. The big issue with this watch I think aside from that dial hand is the inability to remove the case back for servise. I was told that only the factory has the special tool to remove the back. So if and when it requires serive you would need to send the watch back to China to have it opened. I loved the look too much so I bought it anyway. Link to comment Share on other sites More sharing options...
szvwj Posted April 25, 2008 Report Share Posted April 25, 2008 I read that the case can be opened with a tool that's also used to open cell phones (I need to confirmed this). If it's true it would be a solution to opening the case. Link to comment Share on other sites More sharing options...
perry563 Posted April 26, 2008 Author Report Share Posted April 26, 2008 WELL...if you can find out for sure and also get a lead as to where to buy one we are all set! Link to comment Share on other sites More sharing options...
Guest shura110 Posted April 26, 2008 Report Share Posted April 26, 2008 Think these screws need a torX screw driver Link to comment Share on other sites More sharing options...
Francisco Posted April 26, 2008 Report Share Posted April 26, 2008 mine is comingg!!!! Link to comment Share on other sites More sharing options...
pirvan Posted April 26, 2008 Report Share Posted April 26, 2008 Link to comment Share on other sites More sharing options...
jockl1978 Posted April 27, 2008 Report Share Posted April 27, 2008 Think these screws need a torX screw driver Sorry, just looked at it again ,these are no screw heads with slits, crosses, tri wing or torx but a plain mini screw head with five corners Six corners would be no problem, but these are really not common... Link to comment Share on other sites More sharing options...
Guest shura110 Posted May 7, 2008 Report Share Posted May 7, 2008 (edited) I think something like this will open a caseback: http://www.eclipsetools.com/ProductPics/La...egs/800-068.JPGor this one: http://images.google.com/imgres?imgurl=htt...l%3Den%26sa%3DN Edited May 7, 2008 by shura110 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now