MADRED7 Posted April 23, 2008 Report Share Posted April 23, 2008 Dear All, I got an EoD from Angus today....when I tried to set the time and date the stem and crown came out of the movement....unfortunately it was only half of the stem...the rest was inside the asian 7750 in thze normal winding position! I managed to get the broken stem out, canibalized one of my older watches to get a 7750 stem and tried to get the stem/crown back in....pressing the release button and push it back in...but it does not work, I feel a pressure against the stem when pushing in....can it be that the movement was in the winding position when the stem came out??? Please help..... thx guys, much appreciated, Thorsten Quote Link to comment Share on other sites More sharing options...
Dizzy Posted April 23, 2008 Report Share Posted April 23, 2008 im not an expert by any means but have you tried turning the stem slowly and carefully as you put is back in? When i remove a stem its always in the winding position so i dont think thats the problem dizz Quote Link to comment Share on other sites More sharing options...
MADRED7 Posted April 24, 2008 Author Report Share Posted April 24, 2008 I will try that again this afternoon....frustrating when you have a brand-spanking-new watch and cannot wear it (errh OK, I have 2 other EoD Quote Link to comment Share on other sites More sharing options...
RWG Technical Posted April 24, 2008 Report Share Posted April 24, 2008 There could be a number of problems with the keyless works, the only way to figure out what is going on, is to remove the hands and dial and have a look inside. RG Quote Link to comment Share on other sites More sharing options...
MADRED7 Posted April 24, 2008 Author Report Share Posted April 24, 2008 Well....so I assume I have to send it to your home in the near future for a fix. Will contact Jennifer for an appointment. Do you have replacement stems at hand? Thorsten Quote Link to comment Share on other sites More sharing options...
RWG Technical Posted April 24, 2008 Report Share Posted April 24, 2008 Yes I have replacement stems. It sounds to me like the clutch gear is out of position and causing your problem. Because the clutch gear also moves the hacking lever, if the clutch gear gets out of place, the hacking lever can get jammed between the clutch gear and cause the problem you have... RG Quote Link to comment Share on other sites More sharing options...
MADRED7 Posted April 24, 2008 Author Report Share Posted April 24, 2008 OK. Will get back to Jennifer for a free space in your schedule. Thx for the info, Thorsten Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.