jaykeem Posted June 24, 2008 Report Share Posted June 24, 2008 I was wondering if someone could explain to me how to assemble a PAM127. I have all the DSN parts and was trying to test fit the dial but could not get it go in from the caseback. I also just tried putting an 01b dial and movement in and that does not fit either. Did DSN send me the wrong case set? Quote Link to comment Share on other sites More sharing options...
Dizzy Posted June 24, 2008 Report Share Posted June 24, 2008 dial goes in from the front Quote Link to comment Share on other sites More sharing options...
jaykeem Posted June 24, 2008 Author Report Share Posted June 24, 2008 This is what I'm thinking will be required to assemble this watch. Steps probably as follows: 1. Remove bezel and crystal 2. Mount movement 3. Install crown and stem 4. Mount dial 5. Set all three hands with a hand setter 6. Reinstall the bezel and crystal 7. Install the cg, caseback, and I'm done? Think this sounds about right? Quote Link to comment Share on other sites More sharing options...
PAMman Posted June 24, 2008 Report Share Posted June 24, 2008 I haven't ever pulled mine apart but I suspect that to assemble the 127 you should firstly assemble the dial and hands onto the movement (using a watchmaker's movement holder), then mount the unit into the case from the front, fit the stem and crown, fit the clamps, replace the caseback, then bezel and crystal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.