Pam GMT

[Dani]

Photo of the gen

wow i love that combo.

Anyone have some tips to where i shoud start if i gone build this?

I have gen crown,lello dw,V CG.

Cheers

[rolli]

me too.......

rolli

wow i love that combo.

Cheers

[ravishingrick]

Man you have allot of projects going on PAM28, PAM29 and now this. Lovely watch btw, also like the strap combo very much. Good luck with the projects.

A note on your parts selection: A V CG would be wrong for this model. You need an contemporary CG (often rerefed to as an E-series CG), not a Historic CG (oftern refered to as an H-Series CG). V VG's are good for the historic handwind models, H series and above or the Pre Vendome models. Unlike the Comtemporary CG's, historic CG's have a differen profile. They tapper from thick (outer side) to thinner (case side).

Edited July 23, 2008 by ravishingrick

[Dani]

Man you have allot of projects going on PAM28, PAM29 and now this. Lovely watch btw, also like the strap combo very much. Good luck with the projects.

A note on your parts selection: A V CG would be wrong for this model. You need an contemporary CG (often rerefed to as an E-series CG), not a Historic CG (oftern refered to as an H-Series CG). V VG's are good for the historic handwind models, H series and above or the Pre Vendome models. Unlike the Comtemporary CG's, historic CG's have a differen profile. They tapper from thick (outer side) to thinner (case side).

Thanks for the info.

Yeah have some projects going the 28&27 and the 29 and some rolex vintage projects.

Cheers

[scoobs1971]

....Unlike the Comtemporary CG's, historic CG's have a differen profile. They tapper from thick (outer side) to thinner (case side).

Last week I tried on a gen K-series PAM088. It seems like the CG have been updated as well and have the tappered shape now. However, the CG was polished and the lever was brushed. I'm not sure from which series of they changed it. Perhaps some of the experts can fill in?

@Dani: great project!