troaa Posted July 25, 2008 Report Share Posted July 25, 2008 I opened Back-case cap. I try to access front dial, but Movement doesn't apart from case. (apart crwon & mov. fixing bolt) Because dial is inside case hole. Mov. with dial spin,but it can't be aparted!. I think there is front case cap.(just my thought) What should I do? Quote Link to comment Share on other sites More sharing options...
Samurai Posted July 25, 2008 Report Share Posted July 25, 2008 You are a brave man......dissecting a tourbillon! Cool! Quote Link to comment Share on other sites More sharing options...
troaa Posted July 25, 2008 Author Report Share Posted July 25, 2008 You are a brave man......dissecting a tourbillon! Cool! No, I'm not disassembling all parts. Just Cleaning the front glass. Quote Link to comment Share on other sites More sharing options...
llsteve80 Posted July 25, 2008 Report Share Posted July 25, 2008 with some watches you need to take the dial out from the crystal side. This is tricky, and I personally wouldn't do it. Especially that delicate tourbillon. Ask homer. Quote Link to comment Share on other sites More sharing options...
phaedo Posted July 25, 2008 Report Share Posted July 25, 2008 Yeah, what they said. Might only be to clean the glass, but playing with a tourby movement... good luck! Quote Link to comment Share on other sites More sharing options...
ajoesmith Posted July 25, 2008 Report Share Posted July 25, 2008 Please show us a pic of the watch with the case back off, there may be a few extra holes in the case back so you can pop the front bezel of by putting a pin/round punch through the hole from the case back side to remove the bezel. This was the case on my power reserve patek Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.